Abstract:This paper presents a comprehensive investigation on the role and manifestation of the FinFET effect in low voltage 4H-SiC MOSFETs as compared to their Si counterparts. For this purpose, a finite element model of a fabricated SiC FinFET with a fin width of 55 nm is constructed and calibrated to experimental data at a range of operating temperatures. The resulting TCAD model is then applied to examine the impact of the FinFET effect on the threshold voltage and the spatial variation of the carrier density and the drift mobility in the channel for a range of doping concentrations N A of the p-well. It is thereby shown that by reducing the fin width W fin from conventional values ≳ 500 nm down to an interval of optimal values ∼40 nm (keeping everything else constant), it is possible to enhance the channel mobility ∼2.5 times. This improvement is not only found to be much larger than the one predicted in Si (where it is ∼ 15% according to the TCAD model) but also arises at a larger fin width (for a given N A ). In this respect, it is demonstrated that this optimal range of fin widths can be moved to even larger, more practical values by reducing the doping of the p-well. As an alternative, the on-state performance of the gate-all-around FET is also examined in detail following a similar procedure. It is hence shown that this structure can display the FinFET effect at an even larger, nearly conventional W fin of ∼250 nm, whilst attaining a higher channel mobility and inversion layer density even than a stripe FinFET operated at the same overdrive. Thus, in light of all these advantages, the FinFET topology can play a key role in reducing the channel resistance of SiC power MOSFETs.

High-Performance BOI FinFETs Based on Bulk-Silicon Substrate

A new self-aligned BOI (Body-on-insulator) finfet fabricated on bulk SI wafers

High Performance SiGe Body-On-Insulator (BOI) FinFET Fabricated on Bulk Si Substrate Using Ge Condensation Technique

High Performance Junctionless FDSOI SiGe Channel P-Finfet with High ION/IOFF Ratio and Excellent SS

A novel body-on-insulator (BOI) FinFET with excellent TID tolerance and scaling capability

Novel Localized-SOI MOSFET's Combining the Advantages of SOI and Bulk Substrates for Highly-Scaled Devices

Experimental investigation of Quasi-SOI MOSFET for highly scaled devices

Drain and Source on Insulator MOSFETs Fabricated by Local SIMOX Technology

Experimental Results on Drain and Source on Insulator MOSFETs Fabricated by Local SIMOX Technology

Scallop-shaped p-type FinFETs with improved short-channel effects immunity and driving current

Comparison of the Characteristics of DSOI, SOI and Bulk-Si MOSFETs

Sub-10 Nm Silicon FinFET Devices on SOI Substrate Made by Block Copolymer Lithography

Patterned Buried Oxide Layers under A Single Mosfet to Improve the Device Performance

Quasi-Soi Mosfet: A Novel Architecture Combining the Advantages of Soi and Bulk Devices

The FinFET effect in lateral 4H-SiC and Silicon multi-gate MOSFETs

High-Performance Si Nanowire Transistors on Fully Si Bulk Substrate from Top-Down Approach: Simulation and Fabrication

Simulation on the performance comparison for nanoscale SOI and bulk junctionless FinFETs

Study of full isolation SOI technology by highly selective and self-stopping formation of porous oxidized silicon

Novel 14-nm Scallop-Shaped FinFETs (S-FinFETs) on Bulk-Si Substrate

Quasi-SOI MOSFETs—A Promising Bulk Device Candidate for Extremely Scaled Era

Integrated 2D multi-fin field-effect transistors