Abstract:Polydimethylsiloxane (PDMS) is extensively used in clinical flexible electronics, due to its biocompatibility and stability. When it is employed in a stretchable epidermal sensor for long-term monitoring, PDMS must have open pores within it to assure the sweat penetration. In the present paper, we focus on the mechanical properties of porous PDMS with different volume porosities at different temperatures. The emulsion polymerization technique is applied to fabricate porous PDMS. By controlling the ratio of water to PDMS prepolymer, different porosities of PDMS were obtained, and elastic moduli of such porous PDMS were measured in experiment. Results indicate that the elastic modulus increases nonlinearly as its temperature rises from 0 °C to 40 °C (a temperature range frequently encountered in clinical applications). Meanwhile, an asymptotic homogenization method (AHM) is employed to theoretically predict the elastic modulus and Poisson's ratio of porous PDMS, whose reliability is testified by comparing the results with experimentally measured data. Further theoretical discussions on mechanical properties are carried out, and results show that the pore size of porous PDMS has almost no effect on the elastic modulus and Poisson's ratio for certain porosities. Porosity of porous PDMS, however, has significant effect on both of these two mechanical parameters. Two fitted nonlinear formulas are then proposed to estimate the elastic modulus and Poisson's ratio of porous PDMS for any volume porosity less than 50%. All the results in the present paper are essential for mechanical design and optimization of clinical flexible electronics based on porous PDMS.

Study on Porous Silicon as a Sacrificial Layer in Microsensor

Experimental Investigations Of Porous Silicon Sacrificial Layer Techniques On Mems

The Technology of Using Porous Silicon As a Sacrificial Layer in MEMS

Investigation of Selectively Forming Porous Silicon Used in MEMS

Fabrication and characterization of SiO2 microcantilever for microsensor application

Etching Rate Of Sacriflcial Layer In Nanometer

Study of Etching Rate with Sacrificial Layer's Thickness in Nanometer

Analysis and Design of an Accelerometer Fabricated with Porous Silicon as Sacrificial Layer

Investigation of Selectively Forming Nano-Porous Silicon for the Application of MEA

Optimization of Metal-Assisted Etchant Components for Fabrication of Porous Silicon

An innovative methodology for monitoring the sacrificial layer removal process in MEMS structures

Preparation of porous silicon by vacuum sublimation dealloying method

Top-down strategy of implantable biosensor using adaptable, porous hollow fibrous membrane.

Preparation and Characterization of Porous Silicon-Supported Bilayers Lipid Membranes

Study on the Preparation of Nanoporous Anodic Alumina Membrane for Microsensor

Experimental and Theoretical Study on Mechanical Properties of Porous PDMS

A novel method of fabricating porous silicon material: ultrasonically enhanced anodic electrochemical etching

Preparation of Hydrophobic Porous Silicon by Metal-Assisted Etching with Pd-Catalyst

Usage of Porous Al2O3 Layers for RH Sensing

Study on Fabrication of Porous Silicon Gas Sensor and Gas Sensing-characteristics

A Study on the Surface Modification of a Specialized Porous Silicon Membrane