Abstract:Porous silicon (PSi) layers has been prepared in this work via photoelectrochemical (PEC) etching process of an n type silicon wafers of two resistivities (3.5 <a class="link-external link-http" href="http://ohm.cm" rel="external noopener nofollow">this http URL</a> and 0.02 <a class="link-external link-http" href="http://ohm.cm" rel="external noopener nofollow">this http URL</a>) in hydrofluoric (HF) acid of 24.5 precent concentration at different etching times (5 to 25 min). The irradiation has been achieved using laser beam of 2W power and 810 nm wavelength. We have studied the morphological and structural properties of PSi layers using the techniques of Xray Diffraction (XRD) and Scanning Electron Microscopy (SEM) and Gravimetric method. The Xray Diffraction data shows that the structure aspect of PSi layers remains crystalline as well as the decreasing of diffraction angle (thetaB) of Xray from PSi layers (29 to 26 degree) and increasing of the lattice parameter values of PSi structures with increasing of etching times from 5 to 25 min., and the resistivity of silicon substrates from 0.02 to 3.5 <a class="link-external link-http" href="http://ohm.cm" rel="external noopener nofollow">this http URL</a>. The nanocrystallite size is decreasing from (20.72 to 5.13 nm) with increasing of etching times, and the resistivity of silicon substrates. The SEM images shows that the values of pore width and PSi layer thickness increases from (0.5 to 6.25 micrometer) and (6.7 to 47 micrometer) respectively with increasing of etching times and silicon substrates resistivities, while the values of the thickness of walls between pores has been varied from (1.25 to 0.03 micrometer) with increasing of etching times and silicon substrates resistivities. The pore shape of pores has been varied from Cylindrical to Rectangular and to Starful with varied of etching conditions. Further the measured specific surface area of PSi layers has been increased from (7.43 to 235.35 m2/cm3) with increasing of etching times and silicon substrates resistivities.

Preparation of Hydrophobic Porous Silicon by Metal-Assisted Etching with Pd-Catalyst

Ultrahydrophobicity Of Polydimethylsiloxanes-Based Multilayered Thin Films

The Optical Properties of Porous Silicon Produced by Metal-Assisted Anodic Etching

Optimization of Metal-Assisted Etchant Components for Fabrication of Porous Silicon

A Combined Etching Process Toward Robust Superhydrophobic Sic Surfaces

Hydrolysis and silanization of the hydrosilicon surface of freshly prepared porous silicon by an amine catalytic reaction

Preparation and Research of Hydrophobic PDMS/Nano-SiO2 Modified SiO2 Coating

Research on Pt Nanoparticles-Assisted Chemical Etching of Heavily Doped p-Type Monocrystalline Silicon

Reflectivity of porous-pyramids structured silicon surface

Preparation Of Porous Silicon Using Anodizing And Suppercritical Drying

Morphological and Electrical Features of Porous Silicon Prepared by Metal-Induced Chemical Etching

Fabrication and Tribological Properties of Super-Hydrophobic Surfaces Based on Porous Silicon

The Effect of Different Wavelengths on Porous Silicon Formation Process

High hydrosilylation efficiency of porous silicon SiH x species produced by Pt-assisted chemical etching for biochip fabrication

Structural, Morphological and Electrical Properties of Porous Silicon Prepared Under Laser Illumination

Preparation and Characterization of Freestanding Porous Silicon Films with High Porosities

Platinum-Particle-Assisted Etching of Low-, Moderately-, and Highly-Doped p-Type Silicon: Change of Composite Porous Structure

Dry etching of polydimethylsiloxane used for bio-microfluidic systems

Silicon Porosification: State of the Art

Porous silicon formation and electropolishing

Hydrogen Bubbles and Formation of Nanoporous Silicon During Electrochemical Etching