Abstract:In recent years, inspired by “biomimicry”, superhydrophobic surfaces have gained significant attention. Superhydrophobic surfaces demonstrate notable advantages in addressing interfacial issues, and superhydrophobic coatings exhibit excellent waterproofness, anti-fouling, self-cleaning, anti-corrosion, and additional capabilities, making them promising next-generation waterproof materials. However, the complex preparation process, coupled with poor wear resistance and environmental durability, severely limits their practical applications. Therefore, this article started from simplifying the preparation process and improving the durability of the coatings. Epoxy resin (E51) was used as the film-forming material, and carbon nanotubes (CNTs) and dual-sized SiC particles (nano-SiC and micro-SiC) were used as the fillers. Room temperature vulcanized silicone rubber (RTV) was used as a binder interacting with epoxy resin to promote the interface interaction between the fillers and the polymers. This process resulted in the successful preparation of superhydrophobic coatings with outstanding comprehensive performance. When the ratio of μ-SiC to n-SiC was 1:1, the prepared coating exhibited the best superhydrophobic properties with a water contact angle (WCA) of 167.4° and a sliding angle (SA) of 4.6°. Even after undergoing severe mechanical tests, such as sandpaper abrasion for 1000 cycles, sand impact for 100 cycles, cross-cut test, and tape-peeling for 70 cycles, the coatings still maintained their non-wetting Cassie-Baxter state. Furthermore, even after immersion in strong acid, strong alkali and 3.5 wt% NaCl solutions for 6 days, keeping at 500 °C for 2 hours, and exposure to ultraviolet for 6 days, the coatings still exhibited excellent superhydrophobicity. This suggested that the prepared coating had excellent chemical stability and high-temperature resistance. In addition, the superhydrophobic coating exhibited exceptional capabilities in self-cleaning, anti-corrosion, anti-icing, and de-icing properties. Furthermore, this coating, applicable to diverse substrates including board, steel, paper, and glass, demonstrated an impressive water contact angle (WCA) and sliding angle (SA). The spraying method offers the benefits of simplicity and cost-effectiveness. This is poised to significantly broaden its practical applications in various fields, including construction, transportation, and the chemical industry.

A Combined Etching Process Toward Robust Superhydrophobic Sic Surfaces

Facile Preparation of Robust Superamphiphobic Surface by Electrochemical Etching Process Based on the SiC/Al Composites

Fabrication of Air-Permeable Superhydrophobic Surfaces with Excellent Non-Wetting Property

Switchable wetting & flexible SiC thin film with nanostructures

Fabrication of mechanically robust superhydrophobic surfaces based on silica micro-nanoparticles and polydimethylsiloxane

Synthesis of Superhydrophobic Surfaces by Polytetrafluoroethylene Coating on Rectangular Grid Microstructures

Laser Textured Superhydrophobic SiC Ceramic Surface and the Performance of Condensation Heat Transfer

Preparation of an Organosilicon‐Modified Micro‐Nano Symbiotic Superhydrophobic Surface by a One‐Step Spray Method

Mechanically robust superhydrophobicity on hierarchically structured Si surfaces.

Fabrication of pillar-array superhydrophobic silicon surface and thermodynamic analysis on the wetting state transition

Superhydrophobic Silicon Surfaces with Low Light Reflectivity

Wicker-like SiC@graphene multidimensional nanostructures and their robust stable super-hydrophobic property against harsh conditions for self-cleaning application

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

Fabrication of superhydrophobic surfaces with hierarchical structure and their corrosion resistance and self-cleaning properties

Fabricating Superhydrophobic and Oleophobic Surface with Silica Nanoparticles Modified by Silanes and Environment-Friendly Fluorinated Chemicals

Fabrication of a Scratch & Heat Resistant Superhydrophobic SiO2 Surface with Self-Cleaning and Semi-Transparent Performance

DESIGN AND FABRICATION OF SUPER-HYDROPHOBIC SURFACES ON SILICON WAFERS AND STUDY OF EFFECTS TO HYDROPHOBICITY

Robust Superhydrophobic Silicon without a Low Surface-Energy Hydrophobic Coating

Preparation of Hydrophobic Porous Silicon by Metal-Assisted Etching with Pd-Catalyst

Fabrication of a Highly Stable Superhydrophobic Surface with Dual-Scale Structure and Its Antifrosting Properties

Facile preparation of robust superhydrophobic ceramic surfaces with mechanical stability, durability, and self-cleaning function