Abstract:In this work, experiments on controlling the air–water interface morphology by regulating air film internal pressure to achieve adjustable slip length on superhydrophobic surfaces (SHS) were carried out. Fluorinated silica particles with the diameter ranging from 0.5 to 40 microns were sprayed on perforated substrates to obtain different microstructures on SHS. The air film internal pressure was regulated through micro-holes on substrate which helps the plastron sustain under 50 kPa hydrostatic pressure. In the experiment, the variation of the air–water interface morphology was obtained by a total light refection method. Results showed that the reflection intensity on the air–water interface was positively correlated with the air film internal pressure, which reflected that the shape of meniscus changed from concave to flat. The effective slip length on SHS was determined through particle image velocimetry measurements in a fully developed laminar channel flow with a Reynolds number of 500. It was found that with the same Laplace pressure (PL) of the air–water interface, the effective slip length increases as the microstructure average spacing (Rsm) increases and decreases as the root mean square roughness (Rrms) increases. Moreover, a positive relationship between the effective slip length and an empirical parameter including air–water interface morphology and microstructure roughness was obtained. Results showed that a large microstructure average spacing, a low roughness height and a flat air–water interface morphology are pivotal for SHS with random microstructure to obtain maximum slip length in laminar flow. Our research demonstrates that the method of adjusting the internal pressure of the air film cannot only improve the pressure resistance of the air–water interface but also help to improve the drag reduction effect of SHS.

Fabrication of Air-Permeable Superhydrophobic Surfaces with Excellent Non-Wetting Property

Fabrication of Modifier-Free Superhydrophobic Surfaces with Anti-Icing and Self-Cleaning Properties on Ti Substrate by Anodization Method

Abrasion‐Resistant, Hot Water‐Repellent and Self‐Cleaning Superhydrophobic Surfaces Fabricated by Electrophoresis of Nanoparticles in Electrodeposited Sol–Gel Films

Superhydrophobic surface with excellent mechanical robustness, water impact resistance and hydrostatic pressure resistance by two-step spray-coating technique

Water Impalement Resistance and Drag Reduction of the Superhydrophobic Surface with Hydrophilic Strips

Controlling the Morphology and Slippage of the Air–water Interface on Superhydrophobic Surfaces

Corrosion Resistance and Dynamic Anti-Icing of Superhydrophobic Surface on ASW

Fabrication of Robust and Effective Oil/Water Separating Superhydrophobic Textile Coatings

Fabrication of Ag-Fe3O4/Fe Superhydrophobic Surface on Galvanic Sheet for Its Application

Green and timesaving fabrication of a superhydrophobic surface and its application to anti-icing, self-cleaning and oil-water separation

A Facile Way to Fabricate Transparent Superhydrophobic Surfaces

A simple and effective way to fabricate mechanical robust superhydrophobic surfaces

Durable superhydrophobic surface prepared by designing “micro-eggshell” and “web-like” structures

Synthesis of Superhydrophobic FAS-EP/PTFE Coating with Excellent Drag Reduction Performance and Mechanical Robustness

Fabrication of silicone modified polyurethane matrix superhydrophobic coating with hydroxy-terminated polydimethylsiloxane modified SiO2 nanoparticles

Construction of Ultra-Long Service Life Self-Cleaning Slippery Surface on Superhydrophobicity Functionalized by ATRP Treatment

Robust Superhydrophobic Surfaces via the Sand-In Method

Excellent mechanical durability of superhydrophobic coating by electrostatic spraying

Recent Progress in Optimal Design of Superhydrophobic Surfaces

The Fabrication of Unwettable Superhydrophobic Surfaces by Reactive Wetting of AgCuTi into an AAO Template

Preparation of a Durable Superhydrophobic Membrane by Electrospinning Poly (vinylidene Fluoride) (PVDF) Mixed with Epoxy–siloxane Modified SiO2 Nanoparticles: A Possible Route to Superhydrophobic Surfaces with Low Water Sliding Angle and High Water Contact Angle