Abstract:In recent years, inspired by “biomimicry”, superhydrophobic surfaces have gained significant attention. Superhydrophobic surfaces demonstrate notable advantages in addressing interfacial issues, and superhydrophobic coatings exhibit excellent waterproofness, anti-fouling, self-cleaning, anti-corrosion, and additional capabilities, making them promising next-generation waterproof materials. However, the complex preparation process, coupled with poor wear resistance and environmental durability, severely limits their practical applications. Therefore, this article started from simplifying the preparation process and improving the durability of the coatings. Epoxy resin (E51) was used as the film-forming material, and carbon nanotubes (CNTs) and dual-sized SiC particles (nano-SiC and micro-SiC) were used as the fillers. Room temperature vulcanized silicone rubber (RTV) was used as a binder interacting with epoxy resin to promote the interface interaction between the fillers and the polymers. This process resulted in the successful preparation of superhydrophobic coatings with outstanding comprehensive performance. When the ratio of μ-SiC to n-SiC was 1:1, the prepared coating exhibited the best superhydrophobic properties with a water contact angle (WCA) of 167.4° and a sliding angle (SA) of 4.6°. Even after undergoing severe mechanical tests, such as sandpaper abrasion for 1000 cycles, sand impact for 100 cycles, cross-cut test, and tape-peeling for 70 cycles, the coatings still maintained their non-wetting Cassie-Baxter state. Furthermore, even after immersion in strong acid, strong alkali and 3.5 wt% NaCl solutions for 6 days, keeping at 500 °C for 2 hours, and exposure to ultraviolet for 6 days, the coatings still exhibited excellent superhydrophobicity. This suggested that the prepared coating had excellent chemical stability and high-temperature resistance. In addition, the superhydrophobic coating exhibited exceptional capabilities in self-cleaning, anti-corrosion, anti-icing, and de-icing properties. Furthermore, this coating, applicable to diverse substrates including board, steel, paper, and glass, demonstrated an impressive water contact angle (WCA) and sliding angle (SA). The spraying method offers the benefits of simplicity and cost-effectiveness. This is poised to significantly broaden its practical applications in various fields, including construction, transportation, and the chemical industry.

Fabrication of mechanically robust superhydrophobic surfaces based on silica micro-nanoparticles and polydimethylsiloxane

Formation of AlOOH and Silica Composite Hierarchical Nanostructures Thin Film by Sol–gel Dip-Coating for Superhydrophobic Surface with High Adhesion Force

Mechanically robust superhydrophobicity on hierarchically structured Si surfaces.

Fabrication of superhydrophobic surfaces with hierarchical structure and their corrosion resistance and self-cleaning properties

A simple fabrication method for mechanically robust superhydrophobic surface by hierarchical aluminum hydroxide structures

Fabrication of a Scratch & Heat Resistant Superhydrophobic SiO2 Surface with Self-Cleaning and Semi-Transparent Performance

Abrasion‐Resistant, Hot Water‐Repellent and Self‐Cleaning Superhydrophobic Surfaces Fabricated by Electrophoresis of Nanoparticles in Electrodeposited Sol–Gel Films

Fabricating Superhydrophobic and Oleophobic Surface with Silica Nanoparticles Modified by Silanes and Environment-Friendly Fluorinated Chemicals

Fabrication of a Highly Stable Superhydrophobic Surface with Dual-Scale Structure and Its Antifrosting Properties

Fabrication of Superhydrophobic Coating Based on Waterborne Silicone-Modified Polyurethane Dispersion and Silica Nanoparticles

Fabrication of Robust Superhydrophobic Surfaces with Dual-Curing Siloxane Resin and Controlled Dispersion of Nanoparticles

Metallic Hierarchical Structures Uniformly Covered with WC@PDMS Composite Coatings Toward Comprehensively Durable Superhydrophobic Surfaces

Fabrication of silicone modified polyurethane matrix superhydrophobic coating with hydroxy-terminated polydimethylsiloxane modified SiO2 nanoparticles

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

Imparting Superhydrophobicity with a Hierarchical Block Copolymer Coating

Design and Synthesis of Robust Superhydrophobic Coating Based on Epoxy Resin and Polydimethylsiloxane Interpenetrated Polymer Network

Fabrication of Super-Hydrophobic Film with Dual-Size Roughness by Silica Sphere Assembly

Superhydrophobic Surfaces Fabricated by Replica Molding and Its Applications

Superhydrophobic Surface Constructed on Electrodeposited Sol–gel Silica Film

Facile Preparation of Robust Superamphiphobic Coatings on Complex Substrates via Nonsolvent-Induced Phase Separation

Controlling Superhydrophobicity and Oleophobicity of Polydimethylsiloxane-Coated Silica Hybrid Particles