Abstract:Mixed SiO2 nanoparticles with different ratios and contents were dispersed in hydrophobic fluorinated/silanized polymers. The mixture was bonded to the A3 steel substrate with an adhesive to obtain a superhydrophobic surface with excellent performance. The appearance, hardness, adhesion, and surface wettability of the obtained coatings with different ratios of mixed nanoparticles were characterized. Then, a series of superhydrophobic coatings with good hardness, adhesion, and crack-free surfaces were selected for further systematic investigation. The results showed that the coatings with contact angle around 151 degrees similar to x223C 157 degrees can be obtained when the hydrophobic polymer is combined with different proportions of mixed nanoparticles. The surface chemical composition of these coatings changed little while the surface structure changed significantly. The mixing ratios of nanoparticles had a significant effect on the surface morphology and sliding angle. Smaller nanoparticles had a greater impact on superhydrophobic coating performance than larger nanoparticles. Moreover, the mechanical robustness and corrosion resistance of the superhydrophobic coatings regularly changed with the proportions of smaller nanoparticles. Water droplets are easy to roll on the surface of the superhydrophobic coating with hierarchical rough structure, which makes it possesses an excellent self-cleaning performance.

Formation of AlOOH and Silica Composite Hierarchical Nanostructures Thin Film by Sol–gel Dip-Coating for Superhydrophobic Surface with High Adhesion Force

Percolation-dominated Superhydrophobicity and Conductivity for Nanocomposite Coatings from the Mixtures of a Commercial Aqueous Silica Sol and Functionalized Carbon Nanotubes

Facile Fabrication of Superhydrophobic Nanocomposite Coatings Based on Water‐Based Emulsion Latex

One-Step Hydrothermal Creation of Hierarchical Microstructures Toward Superhydrophilic and Superhydrophobic Surfaces

Superhydrophobic Surface Constructed on Electrodeposited Sol–gel Silica Film

Fabrication of mechanically robust superhydrophobic surfaces based on silica micro-nanoparticles and polydimethylsiloxane

Abrasion‐Resistant, Hot Water‐Repellent and Self‐Cleaning Superhydrophobic Surfaces Fabricated by Electrophoresis of Nanoparticles in Electrodeposited Sol–Gel Films

Imparting Superhydrophobicity with a Hierarchical Block Copolymer Coating

Formation of superhydrophobic polymerized n-octadecylsiloxane nanosheets.

Hierarchically structured superhydrophilic coatings fabricated by self-assembling raspberry-like silica nanospheres.

Hierarchically Structured Porous Films of Silica Hollow Spheres Via Layer-by-layer Assembly and Their Superhydrophilic and Antifogging Properties.

Layer-by-Layer Deposition of Poly(diallyldimethylammonium chloride) and Sodium Silicate Multilayers on Silica-Sphere-Coated Substrate—Facile Method to Prepare a Superhydrophobic Surface

Fabrication of superhydrophobic surfaces with hierarchical structure and their corrosion resistance and self-cleaning properties

Preparation and Thermal Stability of Polyorganosiloxane Superhydrophobic Film by Sol-Gel Method

One Step Sol-Gel Electrochemistry For The Fabrication Of Superhydrophobic Surfaces

A High-adhesion Binding Strategy for Silica Nanoparticle-based Superhydrophobic Coatings

Packing the Silica Colloidal Crystal Beads: A Facile Route to Superhydrophobic Surfaces

Calcium Carbonate@silica Composite with Superhydrophobic Properties

Fluorinated Nanosilica Size Effect on Hierarchical Structure and Superhydrophobic Properties of the Epoxy Nanocomposite Film

Fabrication of an optically transparent super-hydrophobic surface via embedding nano-silica

Triple-scale Structured Superhydrophobic and Highly Oleophobic Surfaces