Abstract:In this paper, double-clamped beam with a mass at the center has been fabricated on substrate of a Silicon-on-Insulator (SOI) wafer. Thin layer SOI Field-Effect Transistors (SOI-FETs) have been integrated at ends of the beam on top layer of the SOI wafer, which can be used for stress-sensing. Such a structure can be used as an accelerometer. The applied acceleration can be detected directly by the changing of the drain current. The measured sensitivity and noise floor of the device are 0.91 mV/g and 13 mg/Hz(-1/2). As expected performance of the SOI-FETs, such an accelerometer can be used in a wide temperature range (-60 degrees C to 200 degrees C) in some special applications, such as military, automobile, nuclear and well-logging industry application.Note to Practitioners-This paper describes the method for stress-sensing using the thin layer Silicon-on-Insulator Field-Effect Transistors (SOI-FETs). This method is characterized with adjustable sensitivity and wide working temperature range and is expected to apply in strain gauges, pressure sensors, accelerometers, and cantilever force/displacement sensors. In the paper we take the application in accelerometers for example. A structure of double-clamped beam with a mass at the center has been fabricated on the substrate of a SOI wafer. Based on the devices, we have measured the characteristics of the sensitivity, the noise floor and the working temperature, which is critical in some applications such as military, automobile, nuclear, and well-logging industry application.

Analysis and Design of an Accelerometer Fabricated with Porous Silicon as Sacrificial Layer

An In-Plane Low-Noise Accelerometer Fabricated with an Improved Process Flow

Thin Layer Soi-Fets Used for Stress-Sensing and Its Application in Accelerometers

The Technology of Using Porous Silicon As a Sacrificial Layer in MEMS

Experimental Investigations Of Porous Silicon Sacrificial Layer Techniques On Mems

Piezoresistive Slot-Cantilever Type Accelerometer Inspired from Spider'S Slit Sensilla

A novel capacitive accelerometer with an eight-beam-mass structure by self-stop anisotropic etching of (1 0 0) silicon

Design, Manufacture And Test Of Novel Mems Piezoresistive Accelerometer For High G Application

A Surface Micromachining Process for Suspended RF-MEMS Applications Using Porous Silicon

Design and Fabrication of a Micro-Electromechanical System Sandwich Capacitive Accelerometer

Fabrication of a MEMS Capacitive Accelerometer with Symmetrical Double-Sided Serpentine Beam-Mass Structure

SOI Micro-Accelerometer Fabricated with Anti-Footing Technique

Theoretical and numerical investigation of a new 3-axis SU-8 MEMS piezoresistive accelerometer

Fabrication, Characterization And Failure Analysis Of A Novel Mems Tunneling Accelerometer

Design and Fabrication Research on a Capacitive Accelerometer

A MEMS Sandwich Differential Capacitive Silicon-on-insulator Accelerometer

Micromachined Piezoresistive Accelerometers Based on an Asymmetrically Gapped Cantilever

Design and Fabrication of a Mems Capacitive Accelerometer Based on Double-Device-layers SOI Wafer.

Silicon Micro-Accelerometer with Mg Resolution, High Linearity and Large Frequency Bandwidth Fabricated with Two Mask Bulk Process

Analysis On Twin-Mass Structure For A Piezoresistive Accelerometer

Design And Simulation Of A Novel Piezoresistive Accelerometer For High Accuracy And Overload Ability