Abstract:In this study, a resistive humidity sensor for moisture detection at room temperature is presented. The thin film proposed as a critical sensing element is based on a quaternary hybrid nanocomposite CNHox//SnO2/ZnO/PVP (oxidated carbon nanohorns–tin oxide–zinc oxide–polyvinylpyrrolidone) at the w/w/w/w ratios of 1.5/1/1/1 and 3/1/1/1. The sensing structure consists of a Si/SiO2 dielectric substrate and interdigitated transducers (IDT) electrodes, while the sensing film layer is deposited through the drop-casting method. Morphology and composition of the sensing layers were investigated through scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction, and Raman spectroscopy. Each quaternary hybrid nanocomposite-based thin film’s relative humidity (RH) sensing capability was analyzed by applying a direct current with known intensity between two electrodes and measuring the voltage difference when varying the RH from 0% to 100% in a humid nitrogen atmosphere. While the sensor with CNHox/SnO2/ZnO/PVP at 1.5/1/1/1 as the sensing layer has the better performance in terms of sensitivity, the structure employing CNHox//SnO2/ ZnO/PVP at 3/1/1/1 (mass ratio) as the sensing layer has a better performance in terms of linearity. The contribution of each component of the quaternary hybrid nanocomposites to the sensing performance is discussed in relation to their physical and chemical properties. Several alternative sensing mechanisms were taken into consideration and discussed. Based on the measured sensing results, we presume that the impact of the p-type semiconductor behavior of CNHox, in conjunction with the swelling of the hydrophilic polymer, is dominant and leads to the overall increasing resistance of the sensing film.

Usage of Porous Al2O3 Layers for RH Sensing

Sensitivity Enhancement of Soft Capacitive Pressure Sensors Using a Solvent Evaporation-Based Porosity Control Technique.

Porous Alumina Based Capacitive MEMS RH Sensor

Investigations of room temperature nanoporous alumina humidity sensor

Capacitive humidity sensor with a coplanar electrode structure based on anodised porous alumina film

Moisture measurement using porous aluminum oxide coated microcantilevers

Sensing Mechanism of a Porous Ceramic As Humidity Sensor

Humidity Sensors With Reactively Evaporated Al2o3 Films As Porous Dielectrics

Development of A Cmos-Mems Rf-Aerogel-Based Capacitive Humidity Sensor

Effect of Surface Morphology on the Response Speed of Moisture Sensors

High-Performance Porous MIM-type Capacitive Humidity Sensor Realized Via Inductive Coupled Plasma and Reactive-Ion Etching

Ultrasensitive Humidity Sensors with Synergy between Superhydrophilic Porous Carbon Electrodes and Phosphorus-Doped Dielectric Electrolyte

Resorcinol–formaldehyde aerogels for CMOS-MEMS capacitive humidity sensor

Preparation of Aluminum-Based Porous Al2O3 Humidity-Sensitive Thin Film Sensors by Microarc Oxidation

Anodic alumina membrane capacitive sensors for detection of vapors

Humidity sensitive properties of a novel soluble conjugated copolymer: ethynylbenzene-co-propargyl alcohol

Multi-functional Flexible Sensor Based on Composite of Polyimide Aerogel and TiO2 Nanoparticles with Applications in Humidity Sensing, Water Sensing in Liquid and Photocatalysis

Capacitive Humidity Sensors Based on Mesoporous Silica and Poly(3,4-Ethylenedioxythiophene) Composites.

Quaternary Holey Carbon Nanohorns/SnO2/ZnO/PVP Nano-Hybrid as Sensing Element for Resistive-Type Humidity Sensor

A Micro Capacitive Humidity Sensor Based on Al-Mo Electrodes and Polyimide Film

Nanoporous anodic alumina (NAA) prepared in different electrolytes with different pore sizes for humidity sensing