Top-down strategy of implantable biosensor using adaptable, porous hollow fibrous membrane.

Jin Zhou,Zhen Ma,Xiao Hong,Hui-Min Wu,Shu-Yan Ma,Yang Li,Da-Jing Chen,Hai-Yin Yu,Xiao-Jun Huang

DOI: https://doi.org/10.1021/acssensors.9b00035

IF: 8.9

2019-01-01

ACS Sensors

Abstract:Fabrication of an outer membrane is crucial for implantable biosensor to enhance the long-term stability and accuracy of sensors. Herein, an adaptable controllable, porous outer membrane for an implantable biosensor was fabricated using a "top-down" method, allowing maximum retention of enzyme activity and fine control over membrane microstructure. Polysulfone hollow fibrous membrane with different pore sizes and porosities were used as a base membrane. Chitosan (CH) and sodium alginate (SA) were self-assembled on the inner surface of PSfHM to construct a biocompatible and conductive interface between PSfHM and the electrode. In vitro and in vivo experiments were used to evaluate the performance of implantable glucose biosensors with PSfHM and CH/SA modified PSfHM (PSfHM-CH/SA). The glucose biosensor with PSfHM-CH/SA exhibited a more stable output current than bare sensors and a quick response time (<50 s). The glucose biosensor with PSfHM-CH/SA linear sensing range was between 0 to 22 mM (R2=0.9905), and relative sensitivity remained at >87% within seven days and >76% within fifteen days. Furthermore, response currents recorded by implanted sensors closely followed the blood glucose trend from tail vein blood during in vivo experiments.