Abstract:With the increased use of 2D materials for instrument minimization, research on recrystallization texture of cold-deformed metal foils during annealing becomes attractive, as the recrystallization process is also subjected to external constraints (biaxial thermal strain and surface energy) in addition to the microstructural factors. In this work, the orientation evolution of cold-rolled Cu foils (10 mu m thick) during heating was thoroughly investigated macroscopically by neutron and synchrotron radiation diffraction and microscopically by SEM-EBSD, combined with crystallographic analysis. The results showed that the foils underwent a transition from the cold-rolling texture to a recrystallization texture dominated by two rotated orientations, i.e., RD-rotated Cube and phi(2)-rotated Copper. The transition was screened by both intrinsic microstructural and extrinsic geometrical factors. The orientations of the nuclei were mainly inherited from the deformation orientations. Those with low Taylor factors (Cube, Goss and Brass) demonstrated size preference. The post-nucleation growth was affected by the biaxial thermal elastic constraint and surface energy. Due to their opposite effects, the orientations having moderate biaxial moduli and surface energy density (S, Copper, Brass and recrystallization components) survived, resulting in a mixed texture at the completion of recrystallization. The coherent Sigma 3 boundaries between the new components stabilized their growth through consuming the other crystals separated by random high-angle boundaries. The present results provide quantitative information on recrystallization texture and contribute to deepening the understanding of the recrystallization behavior of cold-worked metals.

SEM/EBSD Analysis of Changes in Crystal Orientation of {111}〈112〉 Cu Single Crystal Caused by The Cold-Rolling

Local Texture Evolution during Rolling Deformation of Single Crystals of {100} Orientation

Crystal Plasticity Analysis of the Orientation-Dependent Grain Rotation and Fragmentation Behaviors in Ferritic Stainless Steel During Cold Rolling

Microstructure of Cold Rolled Single Crystal Cu

Recovery and Recrystallization as a Function of Deformed Microstructure Orientation in Coarse Grained Cold-Rolled Ni

Recrystallization Texture Evolution of Cold-Rolled Cu Foils Governed by Microstructural and Sample Geometrical Factors During Heating

Experimental investigation and simulation of crystallographic orientations evolution in a cold-rolled ultra-thin grain-oriented silicon steel

MICROSTRUCTURAL EVOLUTION OF COLUMNAR GRAIN Al DURING COLD ROLLING II. Mircoscopic Subdivision

MICROSTRUCTURES AND BOUNDARY DISTRIBUTIONS IN Al POLYCRYSTALS ROLLED AT DIFFERENT TEMPERATURES

Deformation And Annealing Textures Of Extruded And Cold Rolled Pure Ni Single Crystals Of Cube Orientation

Evolutions of Cube ({001} ) and {115} Orientations in Cold-Rolled Ultra-Thin Non-Oriented Silicon Steel

Recrystallization Behavior of a Two-Way Cold Rolled 12cr ODS Steel

Characterization of Deformation by Cold Rolling in Ferritic Steel Containing Cu Particles Using Neutron Transmission Analysis

Micro-Crystallographic Analysis of Shear Band Formation Mechanism in Cold Rolled Al-Sc Alloys at Different Precipitation States

Texture transition of shear bands in initially Goss–oriented grains in Fe–3 wt%Si alloy

Orientation Dependence of the Deformation Microstructure of Ta-4% W after Cold-Rolling

Evolution of Orientations and Deformation Structures Within Individual Grains in Cold Rolled Columnar Grained Nickel

Experimental Observation and Modelling of the Orientation Evolution of Individual Grains in Columnar Grain Ni During Cold Rolling

Effects of Cold Rolling Path on Recrystallization Behavior and Mechanical Properties of Pure Copper During Annealing

Slip-induced mechanism of the orientation-dependent deformation banding in cold rolled Al-Mg alloy

Microstructure–grain Orientation Relationship in Coarse Grain Nickel Cold-Rolled to Large Strain