Abstract:The cold rolling behavior of ferritic stainless steel was investigated via crystal plasticity analysis to clarify the effects of initial orientation and neighboring grain interaction on grain rotation and fragmentation behaviors. The analysis revealed that the {112} orientation grain tends to maintain its initial orientation after cold rolling. However, the {110} orientation grain completely disappeared at 80% cold rolling thickness reduction. The {110} orientation grain had high deformation sensitivity. The four initial orientation grains tend to rotated toward the line connecting and , eventually stabilizing at //normal direction (ND). Grains rotate in the following path: → → → → . The dislocation density is different between grains near the grain boundary region and those farther away. The near //ND deformation microstructure region has a lower dislocation density compared to the region near //ND. Furthermore, the {111} orientation grain exhibited significant grain fragmentation, while the {001} orientation grain eventually forms the //rolling direction (RD) deformation microstructure without significant fragmentation. The initial orientation {110} grain resulted in a double fiber deformation texture with //ND and //RD orientations. This grain has grain fragmentation features corresponding to the initial {111} and {001} orientations. These findings are important for understanding the deformation behavior of grains in polycrystalline materials, as well as for designing high-performance metals by controlling the initial microstructure during cold rolling.

Experimental Observation and Modelling of the Orientation Evolution of Individual Grains in Columnar Grain Ni During Cold Rolling

Evolution of Orientations and Deformation Structures Within Individual Grains in Cold Rolled Columnar Grained Nickel

MICROSTRUCTURAL EVOLUTION OF COLUMNAR GRAIN Al DURING COLD ROLLING II. Mircoscopic Subdivision

Texture and Deformation Structure Evolution During Rolling of Individual Grains of Columnar Grain Nickel

EVOLUTION OF LOCAL ORIENTATIONS WITHIN INDIVIDUAL GRAINS IN ROLLED PURE POLYCRYSTALLINE ALUMINUM

Microstructure–grain Orientation Relationship in Coarse Grain Nickel Cold-Rolled to Large Strain

Experimental investigation and simulation of crystallographic orientations evolution in a cold-rolled ultra-thin grain-oriented silicon steel

Recovery and Recrystallization as a Function of Deformed Microstructure Orientation in Coarse Grained Cold-Rolled Ni

Grain Orientation Induced Softening in Electrodeposited Gradient Nanostructured Nickel during Cold Rolling Deformation

The Orientations of Nuclei at Triple Junctions in Deformed Columnar Grain Ni

Analysis of the Growth of Individual Grains During Recrystallization in Pure Nickel

Investigation of Macroscopic Grain Sub-Division of an IF-Steel During Cold-Rolling

The Early Stage Formation of Shear Orientations and the Stability of //ND Orientations During Hot Rolling in Electrical Steels

Microstructure Evolution and Texture Characteristics of Pure Nickel N6 During Cold Rolling Process

Evolutions of Grain Orientation and Dislocation Boundary in Aa1050 Aluminum Alloy During Cold Rolling from Low to Medium Strains

SEM/EBSD Analysis of Changes in Crystal Orientation of {111}〈112〉 Cu Single Crystal Caused by The Cold-Rolling

Crystal Plasticity Analysis of the Orientation-Dependent Grain Rotation and Fragmentation Behaviors in Ferritic Stainless Steel During Cold Rolling

Subdivision of Original Grains During Cold-Rolling of Interstitial-Free Steel

Evolution of microstructure and local crystallographic orientations in rolled Al 1% Mn single crystals of {l_brace} 0 0 1 {r_brace}< 1 1 0> orientation

Local Texture Evolution during Rolling Deformation of Single Crystals of {100} Orientation

Deformation And Annealing Textures Of Extruded And Cold Rolled Pure Ni Single Crystals Of Cube Orientation