Abstract:In this paper, we study the deformation behavior of nickel-based superalloys by in-situ EBSD and uniaxial tensile tests. This study mainly focuses on the microstructure evolution in the same area of the sample during deformation, including the evolution of various types of grain boundaries, geometrically necessary dislocations, grain orientations and texture, and their effect on the mechanical properties. The results show that the rotation of grains is closely related to their initial orientation during deformation. The lattice of grain is rotated to a certain extent to accommodate the more favorable orientation under low strain, leading to higher Schmid factors for the sample. Under large stresses, the grains occur deformation, multiple slip systems start simultaneously or alternately and the Schmid factors value gradually tends to stabilize at a lower level. Meanwhile, the texture orientation density of the initial Rotating cubic {001} texture, α-fiber (RD// ) texture, and γ-fiber (ND // ) gradually decrease or even disappears, while the texture orientation density of Copper {112} and Goss {011} increases during uniaxial tensile deformation for Cr20Ni80 alloy. Grain rotation may be a result of large strain due to stress triaxiality and resulting plane stress condition owing to specimen dimension, which is beneficial to improve the plastic deformability of the alloy. Interestingly, with the increase of strain, the average misorientation angle first decreases and then increases, which is associated with the dislocation density. In addition, serious torsion occurs in the grains during this process, forming a large number of substructures. These substructures result in grain refinement and the Hall-Petch effect. In fact, during the deformation process, multiple strengthening mechanisms act in coordination, leading to an increase in the strength of the alloy.

Deformation And Annealing Textures Of Extruded And Cold Rolled Pure Ni Single Crystals Of Cube Orientation

Recovery and Recrystallization as a Function of Deformed Microstructure Orientation in Coarse Grained Cold-Rolled Ni

Development of the Cube Texture at Low Annealing Temperatures in Highly Rolled Pure Nickel

Development and Stability During High Temperature Annealing of the Cube Texture in Rolled Ni Substrate Materials

Microstructure and Texture Evolution of Cu-Ni-P Alloy after Cold Rolling and Annealing

Effect of cross cold rolling and annealing on microstructure and texture in pure nickel

Local Texture Evolution during Rolling Deformation of Single Crystals of {100} Orientation

Effect of different deformation and annealing procedures on non-magnetic textured Cu60Ni40 alloy substrates

Texture and Deformation Structure Evolution During Rolling of Individual Grains of Columnar Grain Nickel

Evolution of Orientations and Deformation Structures Within Individual Grains in Cold Rolled Columnar Grained Nickel

In-situ observations of static recrystallization and texture formation in a cold-rolled CoCrFeMnNi high entropy alloy

Effect of Reduction on High Temperature Annealing of Cold-Rolled Ni

The Influence of Pre-Annealing on Recrystallization in Heavily Cold-Rolled Nickel

Microstructure–grain Orientation Relationship in Coarse Grain Nickel Cold-Rolled to Large Strain

Recrystallization Texture in Nickel Heavily Deformed by Accumulative Roll Bonding

EBSD Analyses on Recovery and Recrystallization of High Purity Cold Rolled Nickel

Grain Orientation Induced Softening in Electrodeposited Gradient Nanostructured Nickel during Cold Rolling Deformation

Plastic Deformation and Recrystallization of a Ni-Based Single Crystal Superalloy

Influence of deformation temperature on recrystallization in a Ni-based single crystal superalloy

Effects of Strain on Recrystallization of Nickel Metals and Nanometals Produced by Heavy Cold Rolling

In-situ EBSD study of deformation behavior of nickel-based superalloys during uniaxial tensile tests