Abstract:In this paper, we study the deformation behavior of nickel-based superalloys by in-situ EBSD and uniaxial tensile tests. This study mainly focuses on the microstructure evolution in the same area of the sample during deformation, including the evolution of various types of grain boundaries, geometrically necessary dislocations, grain orientations and texture, and their effect on the mechanical properties. The results show that the rotation of grains is closely related to their initial orientation during deformation. The lattice of grain is rotated to a certain extent to accommodate the more favorable orientation under low strain, leading to higher Schmid factors for the sample. Under large stresses, the grains occur deformation, multiple slip systems start simultaneously or alternately and the Schmid factors value gradually tends to stabilize at a lower level. Meanwhile, the texture orientation density of the initial Rotating cubic {001} texture, α-fiber (RD// ) texture, and γ-fiber (ND // ) gradually decrease or even disappears, while the texture orientation density of Copper {112} and Goss {011} increases during uniaxial tensile deformation for Cr20Ni80 alloy. Grain rotation may be a result of large strain due to stress triaxiality and resulting plane stress condition owing to specimen dimension, which is beneficial to improve the plastic deformability of the alloy. Interestingly, with the increase of strain, the average misorientation angle first decreases and then increases, which is associated with the dislocation density. In addition, serious torsion occurs in the grains during this process, forming a large number of substructures. These substructures result in grain refinement and the Hall-Petch effect. In fact, during the deformation process, multiple strengthening mechanisms act in coordination, leading to an increase in the strength of the alloy.

In-situ observations of static recrystallization and texture formation in a cold-rolled CoCrFeMnNi high entropy alloy

Revealing the inhomogeneous nature of microstructure and texture evolution in the cold-rolled CoCrFeMnNi alloy during static recrystallization

Evolution of Microstructure and Crystallographic Texture in Severely Cold Rolled High Entropy Equiatomic CoCrFeMnNi Alloy During Annealing

Microstructure and Texture Evolution of Cu-Ni-P Alloy after Cold Rolling and Annealing

Static recrystallization and texture evolution of cold-rolled powder metallurgy CoCrFeNiN0.07 high-entropy alloy

Microstructure and Texture of Heavily Cold-Rolled and Annealed Fcc Equiatomic Medium to High Entropy Alloys

Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy

Dislocation slips assisted grain rotation and specific texture evolution in a CoCrNi medium entropy alloy

Evolutions of Microstructure and Crystallographic Texture in an Fe-1.2 wt.% Si Alloy After (A)Symmetric Warm Rolling and Annealing

Deformation substructural evolution in transformation-induced plasticity high-entropy alloy during cold rolling

Recovery and Recrystallization as a Function of Deformed Microstructure Orientation in Coarse Grained Cold-Rolled Ni

Systematic investigation of the texture evolution of Cu-Ni alloys with different strains

Static Recrystallization Behavior and Texture Evolution during Annealing in a Cold Rolling Beta Titanium Alloy Sheet

Recrystallization behavior and texture evolution during annealing of cryogenic-rolled 3003 aluminum alloy

Microstructure and texture of heavily cold-rolled and annealed extremely low stacking fault energy Cr26Mn20Fe20Co20Ni14 high entropy alloy: Comparative insights

Microstructure and Texture Evolution of Al0.3CoCrFeNi High-Entropy Alloy After Cold Rolling Deformation

In-situ EBSD study of deformation behavior of nickel-based superalloys during uniaxial tensile tests

Microstructure and Microtexture Evolution of Dynamic Recrystallization of a Ni-based Superalloy under High-Throughput Gradient Thermal Compression

Deformation And Annealing Textures Of Extruded And Cold Rolled Pure Ni Single Crystals Of Cube Orientation

Evolution of Microstructure and Texture During Recovery and Recrystallization in Heavily Rolled Aluminum

Microstructure and Mechanical Properties Evolution of the Al, C-Containing CoCrFeNiMn-Type High-Entropy Alloy during Cold Rolling