Abstract:In this work, high energy synchrotron X-ray diffraction was used during tensile testing of an as-cast eutectic AlCoCrFeNi2.1 high entropy alloy. Aside, from determining for the first time the volume fractions of existing phases, we further detail their role on the alloy deformation behavior. The two major phases, a soft disordered FCC and a hard ordered B2 BCC, were observed to exhibit a stress partitioning effect which can be used to modulate the mechanical response of the material based on the relative volume fraction of each phase. Dislo-cation density analysis revealed that the soft FCC phase had a significantly higher dislocation density right after the onset of plastic deformation. This is attributed to the existence of strain gradients across the lamellar structure, where the hard B2 BCC prevents free deformation of the FCC phase. Nonetheless, despite the increase of the dislocation density in the soft FCC phase, calculations of the strengthening effects induced by generation of dislocations are more significant in the hard B2 BCC phases, as this phase is primarily responsible for the strength increase in the alloy. Besides, the evolutions in dislocation density of the soft FCC and hard B2 BCC phases during tensile deformation obtained from synchrotron X-ray diffraction data are consistent with the evolution of KAM determined by EBSD characterization. Also, lattice strain analysis across two principal directions (parallel and perpendicular to the loading axis) reveals that for these specific orientations there is a preferential deformation of the hard FCC planes which can be related to the deformation response of specific lattice planes at distinct ori-entations, as well as to the phase partitioning stress behavior.

Deformation substructural evolution in transformation-induced plasticity high-entropy alloy during cold rolling

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Deformation stimulated precipitation of a single-phase CoCrFeMnNi high entropy alloy

In-situ observations of static recrystallization and texture formation in a cold-rolled CoCrFeMnNi high entropy alloy

Awakening the metastability of an interstitial high entropy alloy via severe deformation

Microstructure evolution and composition redistribution of FeCoNiCrMn high entropy alloy under extreme plastic deformation

Unraveling the Deformation Behavior of the Fe45Co25Ni10V20 High Entropy Alloy

Deformation mechanism and microstructure evolution during superplastic deformation of friction stir processed CoCrFeNiMn high entropy alloy

Microstructure and Deformation Mechanism of Dual-Phase Al0.5CoCrNiFe High-Entropy Alloy

Deformation Behavior, Microstructure Evolution, Phase Transformation and Plastic Instability Origin of Powder Metallurgy Al0.8Co0.5Cr1.5CuFeNi Alloy During High Temperature Deformation

Atomistic Simulation of Deformation Behaviors Polycrystalline CoCrFeMnNi High-Entropy Alloy under Uniaxial Loading

Hot Deformation Characteristics and Microstructure Evolution of CoCrFeNiZr0.3 Hypoeutectic High-Entropy Alloy

Plastic Deformation Transition in FeCrCoNiAlx High-Entropy Alloys

Deformation Behavior and Strengthening Effects of an Eutectic AlCoCrFeNi2.1 High Entropy Alloy Probed by In-Situ Synchrotron X-ray Diffraction and Post-Mortem EBSD

Elucidating the transition of cryogenic deformation mechanism of CrMnFeCoNi high entropy alloy

Influence of deformation on the structure and the mechanical properties of a high-entropy Fe25Cr20Ni20Co10Mn15Al10 alloy

Effect of Reversible Phase Transformation on Bauschinger Effect in Gd Micro-Alloying Metastable High-Entropy Alloy: Quasi In-Site Observation and Kinetic Explanation

Dislocation slips assisted grain rotation and specific texture evolution in a CoCrNi medium entropy alloy

Deformation substructure development in AlXCoCrFeNi (X = 0, 0.3) high entropy alloy under different influencing factors

Effect of Thermomechanical Processing on Microstructure and Mechanical Properties of CoCrFeNiMn High Entropy Alloy

Deformation Twinning Caused by Warm Rolling and Secondary Recrystallizaion in Twin-Roll Strip Casting Fe81ga19 Alloy