Abstract:High-density dislocations and nano-twinning are known to significantly influence the work hardening ability of materials, presenting a potent approach for enhancing their overall strength. Here, a superior tensile strength-ductility synergy in a FeCoCrNiMo0.2 high entropy alloy (HEA) with high density dislocation and nano-twinning was achieved by employing cryo-rolling followed by subsequent annealing. Through electron microscope observation, the effects of geometrically necessary dislocation density and nano-twinning on tensile strength and plasticity are elucidated. The microstructure analysis reveals a substantial presence of dislocations and nano-twinning within the deformed grains following short-time annealing at 600 °C and 800 °C. The strategic presence of nano-twins serves as effective impediments to dislocation slip, resulting in the storage of dislocations within the grains, which contributes to the alloy's superior strength-ductility synergy and remarkable work hardening ability. Impressively, the obtained tensile strength-ductility matching exhibits yield strength and ductility values of 992.1 MPa/0.19 and 719 MPa/0.39, respectively. Upon increasing the annealing temperature to 1000 °C, high-density annealing twins emerge in the recrystallized grains, accompanied by a concomitant reduction in the geometrically necessary dislocation density due to dislocation rearrangement and annihilation. Furthermore, a small amount of topological close-packed (TCP) phase and L12 phase precipitation during annealing are observed, contributing to increased work hardening ability of the alloy. The findings underscore the importance of microstructural engineering as a valuable strategy for optimizing the mechanical properties of HEAs with a face-centered cubic structure.

Dynamically reversible shear transformations in a CrMnFeCoNi high-entropy alloy at cryogenic temperature

Microstructure evolution in high-pressure phase transformations of CrFeNi and CoCrFeMnNi alloys

Excellent ductility and serration feature of metastable CoCrFeNi high-entropy alloy at extremely low temperatures

Unraveling dual phase transformations in a CrCoNi medium-entropy alloy

Elucidating the transition of cryogenic deformation mechanism of CrMnFeCoNi high entropy alloy

Unraveling the Deformation Behavior of the Fe45Co25Ni10V20 High Entropy Alloy

Temperature-Dependent Superplasticity and Strengthening in CoNiCrFeMn High Entropy Alloy Nanowires Using Atomistic Simulations

Atomic-Scale In Situ Observations of Reversible Phase Transformation Assisted Twinning in a CrCoNi Medium-Entropy Alloy

Molecular simulation of microstructure evolution and plastic deformation of nanocrystalline CoCrFeMnNi high-entropy alloy under tension and compression

Dynamic mechanical responses of the Al0·1CoCrFeNi high entropy alloy at cryogenic temperature

Real-time Nanoscale Observation of Deformation Mechanisms in CrCoNi-based Medium- to High-Entropy Alloys at Cryogenic Temperatures

Cooperative deformation in high-entropy alloys at ultralow temperatures

Deformable κ phase induced deformation twins in a CoNiV medium entropy alloy

Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloy

Unexpected sluggish martensitic transformation in a strong and super-ductile high-entropy alloy of ultralow stacking fault energy

Cryogenic Strengthening of Fe27Co24Ni23Cr26 High-Entropy Alloys Via Hierarchical Nanotwin-Driven Mechanism

Remarkable cryogenic properties by deformation twinning in a coherent precipitation-containing high entropy alloy

Toughening FeMn-based High-Entropy Alloys Via Retarding Phase Transformation

Achieving excellent strength-ductility synergy via high density dislocation and nano-twinning in cryo-rolled FeCoCrNiMo0.2 high-entropy alloy

In-situ study of room temperature tensile deformation of a CrMnFeCoNi high-entropy alloy

Cryogenic deformation strengthening mechanisms in FeMnSiNiAl high-entropy alloys