Abstract:Face-centered cubic (FCC) high/medium entropy alloys (HEAs/MEAs), novel multi-principal element alloys, are known to exhibit exceptional mechanical properties at room temperature; however, the origin is still elusive. Here, we report the deformation microstructure evolutions in a tensile-deformed Co 20 Cr 40 Ni 40 representative MEA and Co 60 Ni 40 alloy, a conventional binary alloy for comparison. These FCC alloys have high/low friction stresses, fundamental resistance to dislocation glide in solid solutions, respectively, and share similar other material properties, including stacking fault energy. The Co 20 Cr 40 Ni 40 MEA exhibited higher yield strength and work-hardening ability than in the Co 60 Ni 40 alloy. Deformation microstructures in the Co 60 Ni 40 alloy were marked by the presence of coarse dislocation cells (DCs) regardless of grain orientation and a few deformation twins (DTs) in grains with the tensile axis (TA) near 〈1 1 1〉. In contrast, the MEA developed three distinct deformation microstructures depending on grain orientations: fine DCs in grains with the TA near 〈1 0 0〉, planar dislocation structure (PDS) in grains with other orientations, and a high density of DTs along with PDS in grains oriented 〈1 1 1〉. Three-dimensional electron tomography revealed that PDS in the MEA confined dislocations within specific {1 1 1} planes, indicating suppression of cross-slip of screw dislocations and dynamic recovery. In-situ X-ray diffraction during tensile deformation showed a higher dislocation density in the MEA than in the Co 60 Ni 40 alloy. These findings demonstrate that FCC HEAs/MEAs with high friction stresses naturally develop unique deformation microstructures which is beneficial for realizing superior mechanical properties compared to conventional materials.

Deformable κ phase induced deformation twins in a CoNiV medium entropy alloy

Unraveling dual phase transformations in a CrCoNi medium-entropy alloy

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Decipher multiple deformation mechanisms in a FeCrCoNi medium entropy alloy for sustained work hardening

Deformation characteristics of nanolayered dual-phase CrCoNi medium-entropy alloy nanowires

Plastic deformation and strengthening mechanism in CoNiV medium-entropy alloy fiber

Atomic-Scale In Situ Observations of Reversible Phase Transformation Assisted Twinning in a CrCoNi Medium-Entropy Alloy

Plastic Deformation Behavior of Pre-Twinned CoCrFeNi High Entropy Alloy under Quasi-Static and Dynamic Deformation

Multiple deformation mechanisms induced by pre-twinning in CoCrFeNi high entropy alloy

Twin-induced transformation strengthening of CoCrNi-based medium-entropy alloy with a gradient nanostructure

The B2 Phase-Driven Microstructural Heterogeneities and Twinning Enable Ultrahigh Cryogenic Strength and Large Ductility in NiCoCr-based Medium-Entropy Alloy

Unusual phase transformation and novel hardening mechanisms upon impact loading in a medium entropy alloy with dual heterogeneous structure

Breaking the trade-off between strength and ductility in nanostructured CrCoNi-based medium-entropy alloys by promoting twinning kinetics

Nano-twinning Induced High Strain Hardening Behavior in a Metastable As-Cast Co30Cr30Fe20Ni20 High Entropy Alloy at Room Temperature

Characteristic deformation microstructure evolution and deformation mechanisms in face-centered cubic high/medium entropy alloys

Dynamically reversible shear transformations in a CrMnFeCoNi high-entropy alloy at cryogenic temperature

Enhancing the strength-ductility trade-off in a NiCoCr-based medium-entropy alloy with the synergetic effect of ultra fine precipitates, stacking faults, dislocation locks and twins

1.8 GPa Ultra-Strong CoCrNiMo 0.2 Medium Entropy Alloy with Strength and Ductility Trade off Via Double Precipitations and High Density Twins

Twinning Engineering of a CoCrFeMnNi High-Entropy Alloy

Achieving High Strength and Deformability in a High Entropy Alloy Containing the Multiscale Phase Structure

Twinning and 9R Phase Transition Mediated Extraordinary Cold-drawn Deformability in NiCoCrFeMo High-Entropy Alloy