Abstract:The present study investigated the aging precipitation behavior and mechanical, electrical properties of Cu–15Ni–8Sn alloy affected by cold rolling with different deformations. During cold rolling, the grain is elongated gradually along rolling direction with increasing deformation, simultaneously accompanied by the occurrence of a great deal of dislocations and deformation twins. During aging process, the coherent DO22 and L12 ordered phases precipitate successively from the matrix after 90% rolling deformation and aging treatment at 400 °C for 0.5 h with the orientation relationship of <math>(1¯10)DO22</math> // <math>(022¯)Cu</math>, <math>[111]DO22</math> // <math>[211]Cu</math>; <math>(11¯1¯)L12</math>// <math>(11¯1¯)Cu</math>, <math>[211]L12</math> // <math>[211]Cu</math>. However, discontinuous precipitation (DP) behavior is significantly accelerated by prior cold rolling. On the one hand, by revealing the underlying growth kinetics of DP, it can be found that the nucleation sites of DP transform from grain edges to grain boundaries gradually with increasing rolling deformation. On the other hand, the nucleation sites and nucleation rate of DP can be enhanced greatly with increasing dislocation density. Furthermore, the interlamellar spacing of DP slightly increases and the morphology transforms from lamellar structure to bush-like structure gradually with increasing rolling deformation. In addition, the hardness, tensile strength and electrical conductivity are obviously improved while the peak aging time greatly shortens with increasing rolling deformation. The optimal combination of properties with a hardness of 409 HV, a yield strength of 1256 MPa, and an electrical conductivity of 7.5 %IACS can be obtained in the sample with 90% rolling deformation after aging treatment at 400 °C for 0.5 h. The corresponding strengthening mechanism and conductive mechanism were discussed. It can be discovered that the precipitation strengthening, dislocation strengthening and solid solution strengthening are believed to be the main strengthening mechanisms to enhance the alloy strength.

Research on Effects of Rolling-Drawing Deformation on Performance of Cu-10Ni-1Fe-1Mn Alloy

The Influence of Warm Rolling Reduction on Microstructure Evolution, Tensile Deformation Mechanism and Mechanical Properties of an Fe-30Mn-4Si-2Al TRIP/TWIP Steel

Effect of Cold Rolling on Microstructure and Mechanical Property of a Novel (fe50mn30co10cr10)97c2mo1 High Entropy Alloy

Effect of Rolling Process on Deformation Structure and Mechanical Properties of Cocrfenimo0.35 High Entropy Alloy

Revealing the Microstructure Evolution Mechanism and Mechanical Responses of a Novel Al–Zn–Mg–Cu Alloy by Hot Deformation Process

Microstructure Evolution and Deformation Behaviour of Cu-10 Wt%fe Alloy During Cold Rolling

Effect of Rolling with Different Amounts of Deformation on Microstructure and Mechanical Properties of the Mg–1Al–4Y Alloy

Effects of Hot Rolling, Intermediate Annealing and Cold Rolling on Microstructure, Texture and Mechanical Properties of an Al-Mg-Si-Cu Alloy

Effect of Deep-Cooling Rolling Deformation on the Microstructure and Mechanical Properties of an Al-4.5Cu-1.5Mg-0.6Mn-0.2Ti Alloy

Effect of Rolling Deformation on Microstructure and Properties of Cu–Ni–Mo Alloy Prepared by Aluminothermic Reaction

Effect of rolling deformation on microstructure and mechanical property of Ti-45Al-7Nb-0.3W alloy

Effect of rolling deformation on microstructure, mechanical and corrosion properties of Al-Zn-Mg-Cu alloy

Tailoring the microstructure and mechanical properties of Cu-Fe alloy by varying the rolling path and rolling temperature

Effect of Cyclic Warm-Rolling Technique on Mechanical Properties of MoCu30 Thin Plates with Heterogeneous Structure

Abnormal Grain Refinement and Synergistic Enhancement of Strength and Plasticity of High-Purity Nickel Via Cycle Skin-Pass Rolling Deformation

Microstructure Evolution and Mechanical Properties of Cu-9Ni-6Sn Alloy During Continuous Cold Deformation Process

Microstructure, Properties and Deformation Mechanism of HCCM Horizontal Continuous Casting Cu–Ni–Co–Si Alloy Strip During Cold Rolling

Effect of cold rolling on aging precipitation behavior and mechanical properties of Cu–15Ni–8Sn alloy

Effects of Cryogenic Rolling on the Microstructure Evolution and Mechanical Properties of Low‐Density Fe‐28Mn‐8Al‐1C Steel

Microstructures and Deformation Mechanisms of Cr26Mn20Fe20Co20Ni14 Alloys

Microstructure and Mechanical Property of Co40NiCrMoalloy Deformed with Cold Rolling