Abstract:Ti 2 AlNb-based alloy foils are promising for aerospace applications. In this work, we investigate the effects of different hot rolling processes on the microstructure and mechanical properties of hot rolled sheets, as well as on the deformation mechanism, microstructure evolution, and mechanical properties of subsequent cold rolling during the formation of Ti 2 AlNb-based alloy foils. Due to the finer uniform grain size, lower dislocation density, and higher compatible deformation between the phases, the elongation of the sheet after hot rolling in the α 2 + O + B2 phase field is 6.8%, which is 2.5 times higher than that of after hot rolling in the α 2 + B2 phase field. The difference in microstructure and mechanical properties after the hot rolling affects the quality of the formation, the deformation mechanism, and the mechanical properties during the cold rolling. The deformation in the cold rolling is mainly in the form of shear bands. Due to the difference in microstructure, the macro shear bands are oriented parallel or at 30–60° to the rolling direction. As the degree of cold rolling deformation increases, the macro shear bands become denser and wider. When rolling to 80%, the micro shear bands <200 nm thick are formed in the microstructure. In addition, during the cold rolling, work hardening, dislocation strengthening, and grain refinement lead to a gradual increase in strength, with elongation decreasing first and then increasing. The texture evolution affects the elastic modulus of the alloy, where the increase in {111}〈110〉 texture causes a decrease in the elastic modulus, while much anomalous slip system {110}〈001〉 activates the {111}〈112〉 texture and increases the elastic modulus. This process should be considered for the cold rolling preparation of Ti 2 AlNb-based alloy foil because of the superior properties of the sheet after hot rolling in the α 2 + O + B2 phase field, its better strength and elongation and higher yield when cold rolling.

Effect of Deep-Cooling Rolling Deformation on the Microstructure and Mechanical Properties of an Al-4.5Cu-1.5Mg-0.6Mn-0.2Ti Alloy

Work Hardening Behavior and Microstructure Evolution of a Cu-Ti-Cr-Mg Alloy during Room Temperature and Cryogenic Rolling

Mechanical property enhancement and microstructure evolution of an Al-Cu-Li alloy via rolling at different temperatures

Influence of cold rolling process on microstructure and mechanical properties of Cu-1.5%Ti alloy

Effect of cold rolling pre-deformation on microstructure and properties of V-1469 Al-Li alloy

Effect of heat treatment on the microstructure and mechanical properties of cryogenic rolling 2195 Al–Cu–Li alloy

Revealing the Microstructure Evolution Mechanism and Mechanical Responses of a Novel Al–Zn–Mg–Cu Alloy by Hot Deformation Process

Effect of cryogenic rolling on the microstructure and texture of CuCrZr alloy

Microstructure evolution and mechanical properties of Al−3.6Cu−1Li alloy via cryorolling and aging

Effect of hot rolling process on the evolution of microstructure and mechanical properties of Ti 2 AlNb-based alloy foil during cold rolling

Effect of pack rolling on microstructures and tensile properties of as-forged Ti-44Al-6V-3Nb-0.3Y alloy

Effect of Cold Rolling and Cryogenic Treatment on the Microstructure and Mechanical Properties of Fe–32Ni Alloy

Effect of cryogenic rolling and multistage thermo-mechanical treatment on the microstructure and properties of the Cu-0.4Cr-0.39Zn-0.1Mg-0.07Zr alloy

Microstructure and Mechanical Property of Co40NiCrMoalloy Deformed with Cold Rolling

Effects Of Rolling Process On Microstructure And Mechanical Property Of 7050 Aluminum Alloy

Research on Effects of Rolling-Drawing Deformation on Performance of Cu-10Ni-1Fe-1Mn Alloy

Enhanced formability of Al–Mg–Si–Zn alloy sheet via dislocation structure and texture during cold rolling

Mechanical Properties and Microstructure of a Ti-6Al-4V Alloy Subjected to Cold Rolling, Asymmetric Rolling and Asymmetric Cryorolling

Microstructure Evolution and Mechanical Properties of Ti-15-3 Alloy During Cold-Rolling

Effects of Deformation at High, Medium, and Cryogenic Temperatures on the Microstructures and Mechanical Properties of Al-Zn-Mg-Cu Alloys

Effect of Cold Rolling Process on Microstructure and Mechanical Properties of High Strength Β Titanium Alloy Thin Sheets