Abstract:A systematic study was conducted on the impact of annealing treatments on the microstructure and properties of cold-rolled Ti50Ni47Fe3 alloys using optical microscopy, scanning electron microscopy, electron backscattered diffraction, and an electronic universal testing machine. It was found that, during low-temperature annealing (400 °C and 500 °C), the annealing time had no significant effect on the microstructure or properties of the Ti50Ni47Fe3 alloy. Only elongation (δ) increased with the increase in the annealing time, and the grain orientation of the Ti50Ni47Fe3 alloy was //RD (rolling direction). When annealing at medium–high temperature (600 °C), as the annealing time increased, recrystallization and grain growth processes occurred, resulting in a continuous decrease in strength and an increase in δ. Meanwhile, it was found that the grain orientation of the cold-rolled Ti50Ni47Fe3 alloy changed from //RD during the recovery and recrystallization processes to //RD after the grain growth process. The orientation distribution function cross-section φ2 = 45° results indicate that the texture was mainly distributed along the γ orientation line (φ1 = 0~90°, Φ = 54.7°, φ2 = 45°). When annealed at 400 °C and 500 °C, the texture of the Ti50Ni47Fe3 alloys was (111)[uvw]. When the annealing treatment was 600 °C for 120 min, a (110)[uvw] texture occurred. Additionally, ductile fracture occurred in all specimens, and the crack origin was located on one side of the fracture surface, with obvious "Y"-shaped propagation. This article studied annealing treatments of cold-rolled Ti50Ni47Fe3 alloys, providing corresponding theoretical guidance for subsequent production applications.

Effect of Reduction on High Temperature Annealing of Cold-Rolled Ni

Effect of an Electric Field on the Texture and Microstructure Evolution during Annealing of High Reduction Cold-Rolled Ni

Effect of cross cold rolling and annealing on microstructure and texture in pure nickel

Development and Stability During High Temperature Annealing of the Cube Texture in Rolled Ni Substrate Materials

Microstructure and Texture Evolution of Cu-Ni-P Alloy after Cold Rolling and Annealing

Development of the Cube Texture at Low Annealing Temperatures in Highly Rolled Pure Nickel

The Influence of Pre-Annealing on Recrystallization in Heavily Cold-Rolled Nickel

Deformation And Annealing Textures Of Extruded And Cold Rolled Pure Ni Single Crystals Of Cube Orientation

Effect of Annealing on the Microstructure, Texture, and Properties of Cold-Rolled Ti50Ni47Fe3 Shape Memory Alloy Sheets

EBSD Analyses on Recovery and Recrystallization of High Purity Cold Rolled Nickel

The Effect of Annealing Treatment on the Microstructure and Texture of a Cold-Rolled TiNiFe Shape Memory Alloy Tube

Effect of Annealing Temperature on Cube Texture Formation in Ni7W/Ni12W/Ni7W Compound Substrate

EFFECT OF ANNEALING TEMPERATURE ON TEXTURE OF COLD-ROLLED NI47TI44NB9 SHEET

Influence Mechanisms of Cold Rolling Reduction Rate on Microstructure, Texture and Magnetic Properties of Non-Oriented Silicon Steel

Cube Texture Development in Pure Ni during Annealing in a High Strength Magnetic Field

Effect of Annealing Process on the Microstructure and Texture of Cold-Rolled High-Purity Al-0.5%Cu Plates

Effects of Strain on Recrystallization of Nickel Metals and Nanometals Produced by Heavy Cold Rolling

Effect of Annealing on Microstructure of a Ni-based Nano-grained Alloy

Evolution of Microstructure and Crystallographic Texture in Severely Cold Rolled High Entropy Equiatomic CoCrFeMnNi Alloy During Annealing

Effects of Annealing on Microstructure and Mechanical Properties of Nano-Grained Ni-Based Alloy Produced by Severe Cold Rolling

Effect of stress-relief annealing on rolled texture of nickel-based alloys