Abstract:Using molecular dynamics (MD) simulation, the influence of crystallographic orientation on the mechanical properties and microstructure evolution of the single-crystal CoCrFeMnNi high-entropy alloy as a face-centered cubic (FCC) metal is explored and quantified by nanoindentation. At the elastic stage of P-h curve, the results of MD-simulation are almost consistent with that of Hertz contact theory fitting, which ensures the accuracy of our results. The plastic deformation is studied by correlating the P-h curve with the instantaneous defect structure, and dominated by nucleation of Shockley partial dislocations or the movements of stacking faults. Furthermore, we discuss the effects of crystallographic orientations[001],[110], and [111] on the mechanical response of materials and the microstructure evolution. The slip mode and the stress-concentrated region are controlled by the crystallographic orientations, and an obvious pop-in behaviors are viewed in [111]-oriented sample, without appearing in other samples. The microstructure evolution exhibits distinct anisotropy causing the discrepancy of dislocation density and hardness. By analyzing the evolution of dislocation density and hardness, the linear relationship between the square root of dislocations density and hardness is revealed, and in good agreement with the classic Taylor hardening expression where the pre-factor is strongly dependent on the crystallographic orientation. In the study, the atomistic results are consistent with those predicted by the classic continuum mechanical theory, which contributes to the application of classic mechanical theory in molecular dynamics simulation.

Evolution Of Microstructure And Local Crystallographic Orientations In Rolled Al-1%Mn Single Crystals Of {001}< 110 > Orientation

Evolution of microstructure and local crystallographic orientations in rolled Al 1% Mn single crystals of {l_brace} 0 0 1 {r_brace}< 1 1 0> orientation

Macroscopic Sub-Division of Rolled Al–1%Mn Single Crystals of {0 0 1}〈110〉 Orientation

Local Texture Evolution during Rolling Deformation of Single Crystals of {100} Orientation

Structural, Magnetic and Mechanical Properties of Oligocrystalline Ni-Mn-Ga Shape Memory Microwires

MICROSTRUCTURAL EVOLUTION OF COLUMNAR GRAIN Al DURING COLD ROLLING II. Mircoscopic Subdivision

Microstructure–grain Orientation Relationship in Coarse Grain Nickel Cold-Rolled to Large Strain

EVOLUTION OF LOCAL ORIENTATIONS WITHIN INDIVIDUAL GRAINS IN ROLLED PURE POLYCRYSTALLINE ALUMINUM

MICROSTRUCTURES AND BOUNDARY DISTRIBUTIONS IN Al POLYCRYSTALS ROLLED AT DIFFERENT TEMPERATURES

Evolution of Orientations and Deformation Structures Within Individual Grains in Cold Rolled Columnar Grained Nickel

Evolutions of Grain Orientation and Dislocation Boundary in Aa1050 Aluminum Alloy During Cold Rolling from Low to Medium Strains

Slip Pattern, Microstructure and Local Crystallography in an Aluminium Single Crystal of Copper Orientation {112}〈111〉

Deformation And Annealing Textures Of Extruded And Cold Rolled Pure Ni Single Crystals Of Cube Orientation

Optimizing Recrystallization Behavior Induced by Mn Micro-Alloying for Reduced Anisotropy in Rolled Al–Cu–Li Alloys

Effect of crystallographic orientation on mechanical properties of single-crystal CoCrFeMnNi high-entropy alloy

Lattice Rotation and Deformation Mechanisms under Tensile Loading in a Single-Crystal Superalloy with [001] Misorientation

Grain Orientation Dependence of Extended Planar Dislocation Boundaries in Rolled Aluminium

Grain Orientation Dependence of Extended Planar Dislocation Boundaries in Cold-Rolled Polycrystalline Aluminium

Macroscopic Subdivision Of Columnar Grain Aluminium With {001} < U Upsilon 0 > Orientations Following Low Strain Deformation

Texture evolution during multi-pass cold rolling and annealing of Ti-2Al-1.5Mn alloy

Orientation dependence of microstructure deformation mechanism and tensile mechanical properties of Nickel-based single crystal superalloys: A molecular dynamics simulation