Abstract:In this contribution, the underlying mechanisms of microstructure evolution and texture development during the cold rolling and annealing of a Ti-2Al-1.5Mn alloy were investigated and elucidated comprehensively. As a result of the heightened dislocation density and grain boundary, the hardness ascended as the successive reductions applied. However, the annealing treatment reinstated the structure through complete recrystallization. During cold working, the dominant basal and prismatic glide inclined the c-axis and < 101̅0 > axis towards the compressive direction and the rolling direction (RD), respectively. The primary rolled orientation consisted of < 101̅0 > fiber, the orientation of { 1̅21̅3 }< 101̅0 > with Euler angle {10°, 45°, 0°}and { 1̅21̅7 }< 101̅0 > with Euler angle {5°, 25°, 0 °} were predominant. Schmid Factor (SF) analysis and orientation rotation related to various textures demonstrated that basal slipping resulted in a descending φ angle in the Bunge system and < 101̅0 > pole parallel to the RD was the stable orientation. It was revealed that the recrystallized grains preponderantly exhibited textures inherited from the rolled matrix, but a new T-type texture also emerged. This implies that both the strain-induced boundary migration (SIBM) mechanism and selective grain growth, which nucleates at different sites, manipulate the annealing process. The study enhances our comprehension of texture evolution mechanisms involved in the plastic forming and helps ascertain the most effective operational parameters for producing high-performance titanium plates.

Macroscopic Sub-Division of Rolled Al–1%Mn Single Crystals of {0 0 1}〈110〉 Orientation

Evolution Of Microstructure And Local Crystallographic Orientations In Rolled Al-1%Mn Single Crystals Of {001}< 110 > Orientation

Evolution of microstructure and local crystallographic orientations in rolled Al 1% Mn single crystals of {l_brace} 0 0 1 {r_brace}< 1 1 0> orientation

Local Texture Evolution during Rolling Deformation of Single Crystals of {100} Orientation

Structural, Magnetic and Mechanical Properties of Oligocrystalline Ni-Mn-Ga Shape Memory Microwires

MICROSTRUCTURAL EVOLUTION OF COLUMNAR GRAIN Al DURING COLD ROLLING II. Mircoscopic Subdivision

Macroscopic Subdivision Of Columnar Grain Aluminium With {001} < U Upsilon 0 > Orientations Following Low Strain Deformation

Macroscopic subdivision of columnar grain aluminium with ?0 0 1?〈u v 0〉 orientations following low strain deformation

Microstructure–grain Orientation Relationship in Coarse Grain Nickel Cold-Rolled to Large Strain

Deformation And Annealing Textures Of Extruded And Cold Rolled Pure Ni Single Crystals Of Cube Orientation

MICROSTRUCTURES AND BOUNDARY DISTRIBUTIONS IN Al POLYCRYSTALS ROLLED AT DIFFERENT TEMPERATURES

Slip Pattern, Microstructure and Local Crystallography in an Aluminium Single Crystal of Copper Orientation {112}〈111〉

Investigation of Macroscopic Grain Sub-Division of an IF-Steel During Cold-Rolling

Evolutions of Grain Orientation and Dislocation Boundary in Aa1050 Aluminum Alloy During Cold Rolling from Low to Medium Strains

Macro deformation twins in single-crystal aluminum

Texture and Deformation Structure Evolution During Rolling of Individual Grains of Columnar Grain Nickel

Origin of Extension Twinning-Mediated Static Recrystallization and Unique Parallel Alignment of (0001) Poles to Transverse Direction in Mg-3Al-0.4Mn (mass%) Alloy Sheet

Microstructures and mechanical properties of Ti-55511 alloy subjected to rolling in the α+β dual-phase region

Evolution of Orientations and Deformation Structures Within Individual Grains in Cold Rolled Columnar Grained Nickel

Texture evolution during multi-pass cold rolling and annealing of Ti-2Al-1.5Mn alloy

Formation of Unusual Rolling Texture in a Mg-Al-Mn Alloy Sheet by Large-Strain Hot-Rolling