Abstract:Cyclic deformation behavior and substructure in single crystal Ti–5at.% Al alloy with different orientations fatigued at Δεt/2=0.4% were examined. The selected loading orientation includes: single prism slip, A; double prism slips [21̄1̄0], B; pyramidal slip, C; and twinning [0001], D. The testing results show that the crystallographic orientation has a strong effect on the cyclic stress response and the plastic deformation mode of Ti–5at.% Al single crystals. The crystals displayed an initial cyclic hardening followed by a striking softening period, and then a saturation stage was reached in specimens A and B. In contrast, an obvious cyclic saturation stage was obtained after first cyclic hardening until to fracture in specimens C and D. Trace analysis on the surface of specimens with an optical microscope shows that the (11̄00) single prism slip was operated in specimen A during cycling. The (101̄0) and (11̄00) double prism slips can be distinguished from the traces on the (0001) surface in specimen B. The (11̄01) pyramidal slip and the (11̄00) prism slip were activated simultaneously in specimen C. Twinning is the primary plastic deformation mode in specimen D. The twinning type includes: {112̄1}, {101̄1}, {112̄2} and {101̄2}. The substructure in the fatigued specimens was examined using TEM. Typical dislocation configuration is well developed saturation bundle structure (SBS) in specimen A, while it is the planar edge dislocations which are tangled on the primary (101̄0) plane and arranged parallel to the [0001] direction in specimen B. Fully developed loop patches were formed in specimen C. Typical deformed structure was the twin bundles and dislocations among twins in specimen D. The effects of plastic deformation mode on the cyclic stress response and the corresponding dislocation configuration of Ti–5at.% Al single crystals are then discussed.

Slip Pattern, Microstructure and Local Crystallography in an Aluminium Single Crystal of Copper Orientation {112}〈111〉

Slip Pattern, Microstructure and Local Crystallography in an Aluminium Single Crystal of Brass Orientation {110}〈112〉

Temperature-Induced Variations in Slip Behavior of Single Crystal Aluminum: Microstructural Analysis

Dislocation Structures In Deformed Metals

Evolution Of Microstructure And Local Crystallographic Orientations In Rolled Al-1%Mn Single Crystals Of {001}< 110 > Orientation

Evolution of microstructure and local crystallographic orientations in rolled Al 1% Mn single crystals of {l_brace} 0 0 1 {r_brace}< 1 1 0> orientation

Orientation dependence of cyclic deformation behavior and dislocation structure in Ti–5at.% Al single crystals

Microstructural and texture evolution investigation of laser melting deposited TA15 alloy at 500?C using in-situ EBSD tensile test

Local Texture Evolution during Rolling Deformation of Single Crystals of {100} Orientation

Experimental and Crystal Plasticity Study on Deformation Bands in Single Crystal and Multi-Crystal Pure Aluminium

Microstructure and flow stress of polycrystals and single crystals

On the Origin of Deformation Mechanisms in a Heterostructured Aluminum Alloy Via Slip Trace and Lattice Rotation Analyses

Evolutions of Grain Orientation and Dislocation Boundary in Aa1050 Aluminum Alloy During Cold Rolling from Low to Medium Strains

Strain Distribution and Lattice Rotations During In-Situ Tension of Aluminum with a Transmodal Grain Structure

Macroscopic Sub-Division of Rolled Al–1%Mn Single Crystals of {0 0 1}〈110〉 Orientation

Cyclic deformation behavior and dislocation structure of Ti-2 at. Pct Al single crystals oriented for double prism slip

In-situ Study of the Effect of Strain Path Change on Dislocation Boundary Evolution in Commercial Purity Aluminum

Influence of localised glide on the recrystallisation of a channel die deformed (211)[111] orientation aluminium single crystal

On twinning and shear banding in copper single crystals with rolling texture orientations plane strain compressed at high strain rate

Orientation dependence of dislocation structure in surface grain of pure aluminium deformed in tension

Grain Orientation Dependence of Extended Planar Dislocation Boundaries in Rolled Aluminium