Abstract:The evolution of deformation microstructure in medium to high stacking fault energy fcc metals has been described in terms of a general framework of grain subdivision involving the formation of rotates volume elements for all deformation modes. The rotated volume elements are ordinary dislocation cells and cell blocks, where a cell block contains a group of cells. The cell blocks are bounded by dislocation boundaries accommodating the lattice misorientations between neighboring cell blocks that deform with different slip system combinations and/or by different strains or strain amplitudes. An important aspect of the deformation structure development is the pronounced dependence on the crystal orientation. This has been shown by the formation of different types of deformation microstructures, for which the dislocation boundaries formed during deformation are characterized by their different morphology, spacing, crystallographic orientation and misorientation angle, in single crystals of different orientations deformed in tension and in rolling. Studies of polycrystal behavior are much less extensive but an orientation effect has been observed on a macroscopic scale in specimen deformed in rolling and on a microscopic scale in specimens deformed in tension and in rolling. The previous studies have shown a need for a more precise characterization of the effectmore » of grain orientation on the microstructural evolution of polycrystalline metals. Such a characterization, if successful, could lead to prediction of the evolution of the deformation microstructure in order to establish quantitative correlation between microstructure, crystallographic texture and properties of polycrystals. The present study only concerns the microstructure, which has been characterized in pure polycrystalline aluminium deformed in tension at room temperature.« less

Microstructural-Based Measurement of Local Stored Energy Variations in Deformed Metals

Measurement of Orientation Dependent Stored Energy of Deformation on A Local Scale

Stored Energy, Microstructure, and Flow Stress of Deformed Metals

Stored Energy Calculation in AA 1050 Based on Deformation Microstructure from Electron Backscatter Diffraction Data

Characterization and Influence of Deformation Microstructure Heterogeneity on Recrystallization

SIMULATION OF STORED ENERGY EVOLUTION IN HOT DEFORMED AUSTENITE ON A MESOSCALE

Local measurements of stored energy: Microstructural and stereological considerations

Microstructural and texture evolution investigation of laser melting deposited TA15 alloy at 500?C using in-situ EBSD tensile test

Grain orientation dependence of microstructure in aluminium deformed in tension

High Strain Gradient Plasticity Associated with Wedge Indentation into Face-Centered Cubic Single Crystals: Geometrically Necessary Dislocation Densities

Grain orientation, deformation microstructure and flow stress

Analysis of Stored Energy in Cold-Rolled Copper Using Bulk and Microstructure-Based Techniques

Local Texture Evolution during Rolling Deformation of Single Crystals of {100} Orientation

Importance of Deformation-Induced Local Orientation Distributions for Nucleation of Recrystallisation

Multiscale Measurements on Temperature-Dependent Deformation of A Textured Magnesium Alloy with Synchrotron X-Ray Imaging and Diffraction

3D Microstructural and Strain Evolution During the Early Stages of Tensile Deformation

Stored Energy in Nickel Cold Rolled to Large Strains, Measured by Calorimetry and Evaluated from the Microstructure

Dislocation Structures In Deformed Metals

Heterogeneous local plastic deformation of interstitial free steel revealed using in-situ tensile testing and high angular resolution electron backscatter diffraction

A Multiscale Investigation of the Physical Origins of Tension--Compression Asymmetry in Crystals and their Implications for Cyclic Behavior