Abstract:During the plastic deformation of metallic materials, part of expended mechanical energy diffuses as heat. The fraction of plastic work converted into heat is called the Taylor–Quinney Coefficient (TQC), which is often assumed to be a constant parameter of about 0.9. The remaining portion of the plastic work is called stored energy. The stored energy is known as the main driving force for dynamic or static recovery and recrystallization. Therefore, numerical predictions and experimental measurements of the stored energy and TQC are essential to optimize thermomechanical material processing. An adequate prediction of the stored energy and the TQC using existing crystal plasticity models in line with the experimental measurements remains a challenging problem. In this work, a thermodynamic class of crystal plasticity models is used to predict the stored energy and TQC of copper and aluminum single crystals. Then, the numerical stored energy predictions are extended to polycrystalline austenitic steel 316L and compared with the experimental measurements from the literature. An ad-hoc factor is introduced in the numerical expression of stored energy in order to compensate for the difference with the experimental measurement. To this end, the contributions of statistically stored dislocations (SSDs) and geometrically necessary dislocations (GNDs) for the stored energy prediction are analyzed to understand the physical origin of the ad-hoc factor. The contribution of GNDs to stored energy and enhanced hardening is accounted for by means of a strain gradient plasticity model. The present systematic finite element crystal plasticity simulations also include specific interface conditions at grain boundaries. The presented computational analysis indicates that, compared to the experiment, there remains dark energy in the evaluation of energy storage as predicted by the proposed thermodynamically consistent crystal plasticity framework.

Stored Energy, Microstructure, and Flow Stress of Deformed Metals

Microstructural-Based Measurement of Local Stored Energy Variations in Deformed Metals

Modeling Energy Storage and Structural Evolution During Finite Viscoplastic Deformation of Glassy Polymers

Analysis of Stored Energy in Cold-Rolled Copper Using Bulk and Microstructure-Based Techniques

Measurement of Orientation Dependent Stored Energy of Deformation on A Local Scale

Stored Energy and Structure in Top-Down Processed Nanostructured Metals

Characterization and Influence of Deformation Microstructure Heterogeneity on Recrystallization

Stored Energy in Nickel Cold Rolled to Large Strains, Measured by Calorimetry and Evaluated from the Microstructure

Stored energy of a severely deformed interstitial free steel

Dark energy in crystals: prediction of stored energy in polycrystalline aggregates

Heterogeneous local plastic deformation of interstitial free steel revealed using in-situ tensile testing and high angular resolution electron backscatter diffraction

Local Deformation Mechanisms in Metal Systems with a Tailored Grain Size Distribution

New Insight for Mechanical Properties of Metals Processed by Severe Plastic Deformation

Analysis and Modeling of Stress-Strain Curves in Microalloyed Steels Based on a Dislocation Density Evolution Model

The Stored Energy in Processed Cu–0.4 Wt.%cr–0.12 Wt.%zr–0.02 Wt.%si–0.05 Wt.%mg

Neutron diffraction method for stored energy measurement in interstitial free steel

Quantification of Heterogeneity in Microstructural Refinement in Metals and Alloys Deformed to High Plastic Strains.

Investigation of Grain Subdivision at Very Low Plastic Strains in A Magnesium Alloy

Influence of surface pre-deformation on the Portevin-Le Chatelier effect and the related multiscale complexity of plastic flow in an Al-Mg alloy

In-situ TEM investigation on deformation mechanisms of a fine-grained 316L stainless steel

Grain size and orientation affected deformation inhomogeneity and local damage of hot-deformed Al-Zn-Mg alloy