Abstract:This study explores the phenomenon of slip transmission across grain boundaries in coarse-grained copper. The associated effects on the deformation gradient are also investigated, using both experiment and simulation. An in-situ tensile test of a fully annealed copper specimen was conducted first using a scanning electron microscope (SEM). The deformation gradient and geometrically necessary dislocation (GND) maps at selected tensile strain values were obtained and characterized by electron backscatter diffraction (EBSD). In addition, a physically based strain gradient crystal plasticity finite element method model has been developed to simulate the early stage of tensile deformation behaviour of copper. In this model, slip transmission across the grain boundary is either allowed or blocked, depending on the alignment of adjacent grains. Slip transmission is allowed at grain boundaries between suitably aligned grains according to the Luster-Morris factor, residual Burgers vector is applied to consider the slip misalignment at GB region, and dislocation accumulation at grain boundaries is included following the Kocks-Mecking law. It was found that dislocation pile-up, lattice rotation and stress concentration were much higher near the impenetrable grain boundaries than at the penetrable ones. Due to the slip transmissions across grain boundaries, the stress and strain concentrations can be partially relaxed, and the slip transmission induced relaxation is associated with the number of active slip systems and shear strain on the best aligned slip systems. This study provides an effective strategy to investigate the early stage of plastic deformation, and a good agreement between experimental observations and simulation results has been achieved.

Investigation of Grain Subdivision at Very Low Plastic Strains in A Magnesium Alloy

In-situ EBSD Study of the Active Slip Systems and Lattice Rotation Behavior of Surface Grains in Aluminum Alloy During Tensile Deformation

In-situ Analysis of Grain Rotation and Lattice Strain Within a Magnesium Polycrystal Based on Synchrotron Polychromatic X-ray Diffraction Technique: (I) Prior to Twin.

Microstructural and texture evolution investigation of laser melting deposited TA15 alloy at 500?C using in-situ EBSD tensile test

The Evolution of Grain Boundary Structure Mediated by Disclinations in Magnesium Alloys under Superplastic Deformation

Strain Distribution and Lattice Rotations During In-Situ Tension of Aluminum with a Transmodal Grain Structure

Automated Analysis Framework of Strain Partitioning and Deformation Mechanisms Via Multimodal Fusion and Computer Vision

In-situ SEM and EBSD Investigation of the Deformation Behavior of Extruded Mg-6Al-1Zn-1.1Sc Alloy

An investigation of slip transmission during uniaxial tensile deformation of a coarse-grained copper via EBSD characterization and crystal plasticity modelling

Plastic Strain Accommodation and Crack Initiation in a Randomly-Oriented Mg-8y-1zr Magnesium Alloy During Accumulated Tensile Deformation

Investigation of Plastic Yielding in Near-Micrometer Grain Size Aluminum Using Synchrotron Microdiffraction

In-Situ Investigation of Slip System Activation, Intergranular Plasticity Transfer, and Deformation Heterogeneity of Al-Zn-Mg-Cu Alloy

Multiscale Measurements on Temperature-Dependent Deformation of A Textured Magnesium Alloy with Synchrotron X-Ray Imaging and Diffraction

An Investigation of Slip and Twinning Behavior of a Zirconium Alloy During Plastic Deformation Based on In-Situ SEM-EBSD

Orientation dependence of intracrystalline and grain boundary deformation behavior in Mg-2Y using nanoindentation and CPFEM

In-situ Study of Microstructural Evolution and Local Strain Distribution During Tensile Loading of Near-Micrometre Grain Size Aluminium

Revealing slip-induced extension twinning behaviors dominated by micro deformation in a magnesium alloy

In-situ EBSD investigation of the effect of orientation on plastic deformation behavior of a single crystal superalloy

ANALYSIS OF DEFORMATION PROCESSES OF MAGNESIUM ALLOY AT ELEVATED TEMPERATURES BY ORIENTATION MAPPING

Characterizing microscale deformation mechanisms and macroscopic tensile properties of a high strength magnesium rare-earth alloy: A combined experimental and crystal plasticity approach

Resolving localized geometrically necessary dislocation densities in Al-Mg polycrystal via in situ EBSD