Abstract:The deformation-induced surface roughening of an Al-Mg alloy is analyzed using a combination of experiments and modeling. A mesoscale oligocrystal of AA5052-O, obtained by recrystallization annealing and subsequent thickness reduction by machining, that contains approx. 40 grains is subjected to uniaxial tension. The specimen contains one layer of grains through the thickness. A laser confocal microscope is used to measure the surface topography of the deformed specimen. A finite element model with realistic (non-columnar) shapes of the grains based on a pair of Electron Back-Scatter Diffraction (EBSD) scans of a given specimen is constructed using a custom-developed shape interpolation procedure. A Crystal Plasticity Finite Element (CPFE) framework is then applied to the voxel model of the tension test of the oligocrystal. The unknown material parameters are determined inversely using an efficient, custom-built optimizer. Predictions of the deformed shape of the specimen, surface topography, evolution of the average roughness with straining and texture evolution are compared to experiments. The model reproduces the averaged features of the problem, while missing some local details. As an additional verification of the CPFE model, the statistics of surface roughening are analyzed by simulating uniaxial tension of an AA5052-O polycrystal and comparing it to experiments. The averaged predictions are found to be in good agreement with the experimentally observed trends. Finally, using the same polycrystalline specimen, texture–morphology relations are discovered, using a symbolic Monte Carlo approach. Simple relations between the Schmid factor and roughness can be inferred purely from the experiments. Novelties of this work include: realistic 3D shapes of the grains; efficient and accurate identification of material parameters instead of manual tuning; a fully analytical Jacobian for the crystal plasticity model with quadratic convergence; novel texture–morphology relations for polycrystal.

Quantification of Heterogeneity in Microstructural Refinement in Metals and Alloys Deformed to High Plastic Strains.

Characterization and Influence of Deformation Microstructure Heterogeneity on Recrystallization

Characterization of heterogeneity in nanometals deformed to large plastic strains

EBSD-Based Techniques for Characterization of Microstructural Restoration Processes During Annealing of Metals Deformed to Large Plastic Strains

Heterogeneous local plastic deformation of interstitial free steel revealed using in-situ tensile testing and high angular resolution electron backscatter diffraction

Local Deformation Mechanisms in Metal Systems with a Tailored Grain Size Distribution

Microstructural Parameter-Based Characterization of Annealing Behaviour in Metals Deformed to High Strains

In situ TEM study of microplasticity and Bauschinger effect in nanocrystalline metals

Strain Distribution and Lattice Rotations During In-Situ Tension of Aluminum with a Transmodal Grain Structure

Uncertainty quantification of microstructure variability and mechanical behaviour of additively manufactured lattice structures

Investigation of Grain Subdivision at Very Low Plastic Strains in A Magnesium Alloy

Experimental and Molecular Dynamic Study of Grain Refinement and Dislocation Substructure Evolution in HSLA and IF Steels after Severe Plastic Deformation

Deformation-Induced Surface Roughening of an Aluminum–Magnesium Alloy: Experimental Characterization and Crystal Plasticity Modeling

The effect of strain rate on the evolution of microstructure in aluminium alloys

Grain size and orientation affected deformation inhomogeneity and local damage of hot-deformed Al-Zn-Mg alloy

Discrete model for discontinuous dynamic recrystallisation applied to grain structure evolution inside adiabatic shear bands

High Resolution 3D Strain and Orientation Mapping within a Grain of a Directed Energy Deposition Laser Additively Manufactured Superalloy

Investigation of Plastic Yielding in Near-Micrometer Grain Size Aluminum Using Synchrotron Microdiffraction

A complete grain-level assessment of the stress-strain evolution and associated deformation response in polycrystalline alloys

In-situ EBSD Study of the Active Slip Systems and Lattice Rotation Behavior of Surface Grains in Aluminum Alloy During Tensile Deformation

Selective growth of recrystallizing grains into well-characterized deformed aluminum at hardness indentation