Abstract:The industrialization of Laser Additive Manufacturing (LAM) is challenged by the undesirable microstructures and high residual stresses originating from the fast and complex solidification process. Non-destructive assessment of the mechanical performance controlling deformation patterning is therefore critical. Here, we use Dark Field X-ray Microscopy (DFXM) to non-destructively map the 3D intragranular orientation and strain variations throughout a surface breaking grain within a directed energy deposition nickel superalloy. DFXM results reveal a highly heterogenous 3D microstructure in terms of the local orientation and lattice strain. The grain comprises $\approx$ 5$\mu$m-sized cells with alternating strain states, as high as 5 $\times 10^{-3}$, and orientation differences <0.5° . The DFXM results are compared to Electron Backscatter Diffraction measurements of the same grain from its cut-off surface. We discuss the microstructure developments during LAM, rationalising the development of the deformation patterning from the extreme thermal gradients during processing and the susceptibility for solute segregation.

What problem does this paper attempt to address?

The problems that this paper attempts to solve are the microstructure defects and high residual stress problems generated during the laser additive manufacturing (LAM) process. Specifically, the paper focuses on how to evaluate and understand these microstructure characteristics and their impact on the mechanical properties of materials by non - destructive means. ### Problem Background 1. **Rapid Cooling and Complex Solidification Process**: - During the laser additive manufacturing process, the material experiences extremely fast cooling rates (about $10^4$ to $10^6$ K/s), which is about $10^5$ times faster than traditional processes. - Rapid cooling leads to significant residual stress, high - density dislocations, and complex microstructure defects inside the material, which seriously affect the mechanical properties of the final product. 2. **Limitations of Existing Characterization Technologies**: - Although the traditional electron back - scatter diffraction (EBSD) technique can provide surface information, its measurement depth is limited, and it is easily affected by surface effects, and cannot accurately reflect the real stress distribution inside the material. - Other non - destructive methods such as X - ray tomography (µCT) can provide volume information, but lack detailed data on strain and crystal orientation. ### Paper Objectives To solve the above problems, this paper uses the dark - field X - ray microscopy (DFXM) technique to perform three - dimensional strain and orientation mapping of individual grains in the directed energy deposition laser additive manufacturing (DED - LAM) nickel - based superalloy. DFXM has a high spatial resolution (about 150 nm) and a high angular resolution (about 0.001°), and can non - destructively reveal the microstructure characteristics inside the grains. ### Main Research Contents - **3D Strain and Orientation Mapping**: Use DFXM to perform non - destructive mapping of three - dimensional strain and orientation changes of a surface - fractured grain. - **Comparison with EBSD Results**: Compare the DFXM results with the EBSD measurement results of the same grain cross - section to verify the effectiveness and accuracy of DFXM. - **Analysis of Microstructure Formation Mechanism**: Explore the influence of extreme thermal gradients and solute segregation on the development of microstructure during the LAM process, and explain the formation mechanism of the deformation mode. ### Key Findings - The DFXM results show that there is a highly heterogeneous three - dimensional microstructure inside the grains, including cellular structures of about 5 µm in size, with a strain state as high as $5\times10^{-3}$ and an orientation difference of less than 0.5°. - These microstructure characteristics are closely related to extreme thermal gradients and solute segregation, especially the low - angle grain boundaries and high - density dislocations formed during the rapid cooling process. Through these studies, the paper provides new perspectives and technical means for understanding and optimizing the microstructure of laser - additive - manufactured materials.

High Resolution 3D Strain and Orientation Mapping within a Grain of a Directed Energy Deposition Laser Additively Manufactured Superalloy

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

Understanding Orientation-Dependent Plasticity in Laser Beam Powder Bed Fusion Stainless Steel Through Crystal Plasticity Modelling

Understanding the strain localization in additively manufactured materials: Micro-scale tensile tests and crystal plasticity modeling

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

A Synchrotron Study of Microstructure Gradient in Laser Additively Formed Epitaxial Ni-based Superalloy

Correlative Synchrotron X-ray Imaging and Diffraction of Directed Energy Deposition Additive Manufacturing

In situ observation of crystal rotation in Ni-based superalloy during additive manufacturing process

Resolving thermal gradients and solidification velocities during laser melting of a refractory alloy

Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy

Distribution of Microstructure, Elastic Modulus and Residual Stress Near the Interface in Laser Repaired GH4169 Superalloy

A Synchrotron Study of Defect and Strain Inhomogeneity in Laser-Assisted Three-Dimensionally-printed Ni-based Superalloy

Anisotropic dynamic compression response of an ultra-high strength steel fabricated by laser hybrid additive manufacturing

Investigation of the grain deformation to orthogonal cutting process of the textured Alloy 718 fabricated by laser powder bed fusion

The microstructural evolution and mechanical response of laser direct energy deposition Inconel 718 alloy based on simulation and experimental methods

LDED-based additive-subtractive hybrid manufacturing of Inconel 718 superalloy: evolution of microstructure and residual stress

Microstructure evolution in AM produced superalloy thin struts at low plastic strain

Monitoring of laser-induced fast recrystallization in SS-316L through synchrotron X-ray diffraction

Utilizing local orientation image analysis for microstructure quantification in additive manufacturing

In situ and Operando X-ray Imaging of Directed Energy Deposition Additive Manufacturing

Multi-scale microstructural investigation of a laser 3D printed Ni-based superalloy