Abstract:The additive manufacturing of directionally solidified Ni-based superalloys remains a significant challenge due to the formation of stray equiaxed grains and their high susceptibility to cracking, particularly for high-volume gamma "-type Ni-based superalloys. In this study, a novel strategy based on temperature field management was proposed to prevent hot cracking and control crystallographic texture during laser powder bed fusion (LPBF) of IN738LC superalloy. The influence of laser parameters and substrate preheating on crack density, melt pool morphology, and texture of IN738LC superalloy was investigated. The fluid dynamics and thermal behavior of melt pool was simulated using the discrete element model (DEM) and volume of fluid (VOF) method. The processing window for achieving defect-free IN738LC samples was established and was found to be highly affected by substrate preheating. Substrate preheating at 350 degrees C resulted in expanded processing window, with the volume energy density ranging from 42.9 to 62.5 J/mm(3) without substrate preheating to 40-75 J/mm(3). The enlarged processing window was achieved by reducing cracking susceptibility due to the reduced temperature gradient and cooling rate. A unique crystallographic lamellar microstructure (CLM), comprising a <110>-oriented major layer and <100>-oriented sub-layer along the building direction, was successfully achieved in the LPBF-processed IN738LC superalloy. The solidification conditions for obtaining such a CLM were discussed on the aspects of temperature gradient and solidification rate within the melt pool. This work provides new insights and methods for preparing crack-free gamma "-Ni-based superalloys with specific textures, which is favorable for improving the high-temperature properties.

In situ observation of crystal rotation in Ni-based superalloy during additive manufacturing process

A Synchrotron Study of Microstructure Gradient in Laser Additively Formed Epitaxial Ni-based Superalloy

Thermal behavior and microstructural evolution of additively manufactured Ni-based superalloys via multi-scale simulation

Epitaxial growth behavior and stray grains formation mechanism during laser surface re-melting of directionally solidified nickel-based superalloys

Influence of Cooling Scenarios on the Evolution of Microstructures in Nickel-Based Single Crystal Superalloys

Origin of hot cracking formation and suppression method in laser additive manufactured nickel-based superalloys

Influence of Γ/γ′ Morphology Evolution on the Mechanical Properties of Ni-based Single Crystal Superalloys Formed by Laser Metal Deposition

Homogenization Kinetics of a Nickel-based Superalloy Produced by Powder Bed Fusion Laser Sintering

Multi-scale microstructural investigation of a laser 3D printed Ni-based superalloy

Numerical Modeling of Microstructure Evolution During Laser Additive Manufacturing of a Nickel-Based Superalloy

Real-time Microstructure Imaging by Laue Microdiffraction: A Sample Application in Laser 3D Printed Ni-based Superalloys.

Microscale Observation Via High-Speed X-ray Diffraction of Alloy 718 During in Situ Laser Melting

Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys

Investigation of Cracking Mechanism and Yield Strength Associated with Scanning Strategy for an Additively Manufactured Nickel-Based Superalloy

Crack Inhibition and Crystallographic Texture Control in an Additively Manufactured IN738LC Ni-based Superalloy

Causes Analysis on Cracks in Nickel-Based Single Crystal Superalloy Fabricated by Laser Powder Deposition Additive Manufacturing

A new strategy to inhibit stray grain formation during laser directed solidification of single crystal superalloys

Crystal rotation during alloy heating

Molecular Dynamics Simulations of Microstructure and Dislocation Evolution of Single-Crystal Ni-based Superalloys under Femtosecond Laser Loading

Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion

High-speed Synchrotron X-Ray Imaging and Multi-Physics Modeling of Molten Pool and Gas Dynamics in Laser Additive Manufacturing of a Medium-Entropy Alloy