Correlative Synchrotron X-ray Imaging and Diffraction of Directed Energy Deposition Additive Manufacturing

Yunhui Chen,Samuel J. Clark,David M. Collins,Sebastian Marussi,Simon A. Hunt,Danielle M. Fenech,Thomas Connolley,Robert C. Atwood,Oxana V. Magdysyuk,Gavin J. Baxter,Martyn A. Jones,Chu Lun Alex Leung,Peter D. Lee

DOI: https://doi.org/10.48550/arXiv.2009.07930

2020-09-17

Abstract:The governing mechanistic behaviour of Directed Energy Deposition Additive Manufacturing (DED-AM) is revealed by a combined in situ and operando synchrotron X-ray imaging and diffraction study of a nickel-base superalloy, IN718. Using a unique process replicator, real-space phase-contrast imaging enables quantification of the melt-pool boundary and flow dynamics during solidification. This imaging knowledge informed precise diffraction measurements of temporally resolved microstructural phases during transformation and stress development with a spatial resolution of 100 $\mu$m. The diffraction quantified thermal gradient enabled a dendritic solidification microstructure to be predicted and coupled to the stress orientation and magnitude. The fast cooling rate entirely suppressed the formation of secondary phases or recrystallisation in the solid-state. Upon solidification, the stresses rapidly increase to the yield strength during cooling. This insight, combined with IN718 $'$s large solidification range suggests that the accumulated plasticity exhausts the alloy$'$s ductility, causing liquation cracking. This study has revealed additional fundamental mechanisms governing the formation of highly non-equilibrium microstructures during DED-AM.

Applied Physics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the technical challenges in the Directed Energy Deposition Additive Manufacturing (DED - AM) process due to the characteristics of rapid solidification, such as the significant generation of residual stress and the formation of undesirable microstructure features (such as pores, cracks or large columnar grains). These problems limit the wide application of DED - AM in the production of safety - critical components. To overcome these limitations, a deeper understanding of the transient physical phenomena during the manufacturing process is required. By combining in - situ and operando synchrotron X - ray imaging and diffraction techniques, the paper studied the DED - AM process of nickel - based superalloy IN718, aiming to reveal and quantify the molten pool dynamics, the solid - state transformation sequence and the formation mechanism of undesirable microstructure features.

Specifically, the paper focuses on the following aspects:

1. **Molten pool dynamics**: Use phase - contrast imaging technology to quantify the molten pool boundary and flow dynamics, especially the changes during the solidification process.
2. **Microstructure transformation**: Through precise diffraction measurements, study the microstructure phase transformation and stress development with time resolution and a spatial resolution of 100 micrometers.
3. **Thermal gradient and solid - state transformation**: The thermal gradient determined by diffraction measurements helps to predict the dendritic solid - state microstructure and correlate it with the stress direction and magnitude.
4. **Rapid cooling effect**: The rapid cooling rate completely suppresses the formation of secondary phases or solid - state recrystallization.
5. **Stress evolution**: After solidification, the stress rapidly increases to the yield strength level.
6. **Material property influence**: The large solidification range of IN718 indicates that the accumulated plasticity depletes the ductility of the alloy, leading to the formation of liquation cracks.

Through these studies, the paper provides an understanding of additional fundamental mechanisms for the formation of highly non - equilibrium microstructures in the DED - AM process, which is of great significance for optimizing DED - AM process parameters, improving material properties and reducing defects.