Abstract:The realization of electrospinning‐derived oxide nanofiber‐based transistors composed of In2O3 and ZnO has been reported. By controlling the doping level in nanofibers, significant enhancement in both the electron mobility and thin‐film transistor (TFT) stress stability have been demonstrated. Current findings elucidate the significant advance of electrospinning‐derived oxide nanofiber‐based transistors toward practical applications for future low‐cost and high‐performance electronics. Although In2O3 nanofibers (NFs) are regarded as one of the active channel materials for next‐generation, low‐cost thin‐film transistors (TFTs), these NFs‐based devices still suffer from the degraded carrier mobility and operational instability, limiting the ability of such devices to replace current polycrystalline silicon technologies. Here, it is shown that nanofiber channel transistors with high electron mobility and operational stability can be achieved by selectively doping Zn element into electrospun In2O3 NFs. By precisely manipulating the doping level during NFs fabrication, their crystallinity, surface morphology, and corresponding device performance can be regulated reliably for enhanced transistor performances. It has been detected that InZnO/SiO2 TFTs with an optimized Zn doping concentration of 50% have demonstrated the high field‐effect mobility (μFE) of 6.38 cm2 V−1 s−1, the larger ION/IOFF of 4.12 × 107 and operation in the energy‐efficient enhancement‐mode. Low frequency noise (LFN) measurements have displayed that the scattering and defects inside the NFs are effectively suppressed by the particular microstructure. When integrating ALD‐derived Al2O3 films as the gate dielectric into TFTs devices, their electron mobility and ION/IOFF can be further improved to 37.82 cm2 V−1 s−1 and 2.92 × 108, respectively. To demonstrate the potential toward more complex logic applications, a low voltage resistor‐loaded unipolar inverter is built by using InZnO/Al2O3 TFT, exhibiting a high gain of 20.95 and full swing characteristics. These optimized parameters have demonstrated the significant advance of this electrospinning technique toward practical applications for high performance and large‐scale electronics.

From Conductor to Semiconductor: Diameter Tuning of Electrospun ITO Nanowire for Low-Cost Electronics

Preparation and Electrical Properties of Electrospun Tin-Doped Indium Oxide Nanowires

Synthesis of ZnO Nanowires for Thin Film Network Transistors

Low-Voltage Operating Field-Effect Transistors and Inverters Based on In2O3 Nanofiber Networks

Electrospinning‐Driven Binary Oxide Nanofiber Networks with Tunable Amorphous Microstructure for Booming Transistors and Circuits Operation

Modulating Electrical Performances of In2O3 Nanofiber Channel Thin Film Transistors Via Sr Doping

Modulating Electrical and Photoelectrical Properties of One-Step Electrospun One-Dimensional SnO2 Arrays

Controllable Electrical Properties of Metal-Doped In2O3 Nanowires for High-Performance Enhancement-Mode Transistors.

Electrospun P-Type Cuo Nanofibers for Low-Voltage Field-Effect Transistors

Nanometre-thin Indium Tin Oxide for Advanced High-Performance Electronics

A Doping-Free Approach to Carbon Nanotube Electronics and Optoelectronics

Controllable Etching-Induced Contact Enhancement for High-Performance Carbon Nanotube Thin-Film Transistors

Direct Synthesis of Semiconducting Single‐Walled Carbon Nanotubes Toward High‐Performance Electronics

Electrospun P-Type Nickel Oxide Semiconducting Nanowires for Low-Voltage Field-Effect Transistors

Fabrication and Optoelectronic Characterization of Suspended In2O3 Nanowire Transistors

A Method to Fabricate Uniform Silver Nanowires Transparent Electrode Using Meyer Rod Coating and Dynamic Heating

Silver nanowires with semiconducting ligands for low-temperature transparent conductors

Rational tuning of the cation ratio in metal oxide semiconductor nanofibers for low-power neuromorphic transistors

Electrolessly Deposited Electrospun Metal Nanowire Transparent Electrodes

Electrospinning-Driven Dual-Channel-Based Field-Effect Transistors by Heterojunction Architecture

Draw Spinning of Wafer‐Scale Oxide Fibers for Electronic Devices