Abstract:The realization of electrospinning‐derived oxide nanofiber‐based transistors composed of In2O3 and ZnO has been reported. By controlling the doping level in nanofibers, significant enhancement in both the electron mobility and thin‐film transistor (TFT) stress stability have been demonstrated. Current findings elucidate the significant advance of electrospinning‐derived oxide nanofiber‐based transistors toward practical applications for future low‐cost and high‐performance electronics. Although In2O3 nanofibers (NFs) are regarded as one of the active channel materials for next‐generation, low‐cost thin‐film transistors (TFTs), these NFs‐based devices still suffer from the degraded carrier mobility and operational instability, limiting the ability of such devices to replace current polycrystalline silicon technologies. Here, it is shown that nanofiber channel transistors with high electron mobility and operational stability can be achieved by selectively doping Zn element into electrospun In2O3 NFs. By precisely manipulating the doping level during NFs fabrication, their crystallinity, surface morphology, and corresponding device performance can be regulated reliably for enhanced transistor performances. It has been detected that InZnO/SiO2 TFTs with an optimized Zn doping concentration of 50% have demonstrated the high field‐effect mobility (μFE) of 6.38 cm2 V−1 s−1, the larger ION/IOFF of 4.12 × 107 and operation in the energy‐efficient enhancement‐mode. Low frequency noise (LFN) measurements have displayed that the scattering and defects inside the NFs are effectively suppressed by the particular microstructure. When integrating ALD‐derived Al2O3 films as the gate dielectric into TFTs devices, their electron mobility and ION/IOFF can be further improved to 37.82 cm2 V−1 s−1 and 2.92 × 108, respectively. To demonstrate the potential toward more complex logic applications, a low voltage resistor‐loaded unipolar inverter is built by using InZnO/Al2O3 TFT, exhibiting a high gain of 20.95 and full swing characteristics. These optimized parameters have demonstrated the significant advance of this electrospinning technique toward practical applications for high performance and large‐scale electronics.

Synthesis of ZnO Nanowires for Thin Film Network Transistors

Zinc Oxide Nanowire Networks for Macroelectronic Devices

ZnO Nanowire and $\hbox{ws}_{2}$ Nanotube Electronics

High-performance, Fully Transparent, and Flexible Zinc-Doped Indium Oxide Nanowire Transistors

Low-Temperature Sintering of In-Plane Self-Assembled ZnO Nanorods for Solution-Processed High-Performance Thin Film Transistors

Electrical Properties of Wide Bandgap ZnMgO and Fabrication of Transparent Thin Film Transistors

Investigation of Thin Film Transistor Based on ZnO Nanowires Via Screen-Printing Method

Nanotube and Nanowire Transistors

Transparent Thin-Film Transistors Based on c-Axis Oriented, Verti cally Aligned ZnO Nanorod Arrays via Solution Pro cessing

Non-aqueous solution processed ZnO thin film transistors

Optical and Electrical Properties of N-doped ZnO and Fabrication of Thin-Film Transistors

Fabrication And Characteristics Of Zno-Based Thin Film Transistors

Transparent metal oxide nanowire transistors.

ZnO Nanowire Network Transistors Based on a Self-Assembly Method

A Simple and Sufficient Method to Fabricate Zno Nanowire Thin-Film Transistors

Recent advances in ZnO transparent thin film transistors

ZnO Nanofiber Thin‐Film Transistors with Low‐Operating Voltages

Electrospinning‐Driven Binary Oxide Nanofiber Networks with Tunable Amorphous Microstructure for Booming Transistors and Circuits Operation

Fabrication of Zinc Oxide Thin Film Transistors via Low-Temperature Solution Processing

Low-Temperature, All-Inorganic Nanoparticle Solution Process for Zno Nanowire Network Transistor Fabrication on A Polymer Substrate

Metal oxide nanowire transistors