Abstract:As a promising candidate to replace the brittle and expensive transparent indium tin oxide (ITO) conductor, the use of silver nanowire (AgNW) networks still involves issues such as high-temperature post-treatments and poor substrate adhesion for industrial application. Here a room-temperature soldering and one-step solution method is developed to achieve high-performance Ag nanowire transparent conductive films (TCFs). A nonconductive binder is prepared from poly(dopamine) and alginic acid which contains abundant catechol and carboxylic acid functional groups. The drying of the binder on the Ag nanowire percolation networks induces tighter contact among the nanowires and strong adhesion to the substrate, simultaneously enhancing the electrical and mechanical properties without a high-temperature annealing process. As a result, a highly conductive and bendable AgNW film is demonstrated on a low-cost polyethylene glycol terephthalate (PET) substrate, showing an 89% optical transmittance at λ = 550 nm and a sheet resistance of 16.3 Ohm sq(-1). Its optical and electrical performances are superior to those obtained from the reported indium tin oxide (ITO) films. Moreover, the AgNW film exhibits strong adhesion to the substrate, maintaining its conductivity after 100 tape tests, and it still resists the tape test even after exposure to solvent for several hours. Most importantly, the film shows good reliability during long-term 85 °C/85% RH (relative humidity) aging, which has been rarely investigated although it is a critical requirement for industrial application. The advanced and wide-ranging features of the prepared AgNW film greatly contribute to its use as a transparent electrode in multifunctional flexible electronic devices.

Silver nanowires with semiconducting ligands for low-temperature transparent conductors

Solution-processed flexible transparent conductors composed of silver nanowire networks embedded in indium tin oxide nanoparticle matrices

Fused silver nanowires with metal oxide nanoparticles and organic polymers for highly transparent conductors

Chemical Sintering of Direct-Written Silver Nanowire Flexible Electrodes under Room Temperature.

A Room-Temperature Environmentally Friendly Solution Process to Assemble Silver Nanowire Architectures for Flexible Transparent Electrodes

A Method to Fabricate Uniform Silver Nanowires Transparent Electrode Using Meyer Rod Coating and Dynamic Heating

Metal Nanogrids, Nanowires, and Nanofibers for Transparent Electrodes

Low-Temperature Solution Processed Random Silver Nanowire as a Promising Replacement for Indium Tin Oxide

Electrolessly Deposited Electrospun Metal Nanowire Transparent Electrodes

Synthesis of ZnO Nanowires for Thin Film Network Transistors

Low-temperature Solution Processed Flexible Silver Nanowires/zno Composite Electrode with Enhanced Performance and Stability

Fabrication of silver nanowire transparent electrodes at room temperature

Self-Limited Nanosoldering of Silver Nanowires for High-Performance Flexible Transparent Heaters

Wet-spinning Approach to Continuous Bioinspired Composites Based on Graphene Oxide and Sodium Alginate

Manipulating Nanowire Assembly for Flexible Transparent Electrodes

Transparent conducting silver nanowire networks

Fused Silver Nanowires with Silica Sol Nanoparticles for Smooth, Flexible, Electrically Conductive and Highly Stable Transparent Electrodes

Regulating Silver Nanowire Size Enables Efficient Photoelectric Conversion

Annealing-Free and Strongly Adhesive Silver Nanowire Networks with Long-Term Reliability by Introduction of A Nonconductive and Biocompatible Polymer Binder

Recent Progress in Silver and Copper Nanowire Flexible Transparent Conductors

Fabrication and Properties of Silver Nanowire Flexible Transparent Electrode