Abstract:Transparent conductive electrodes (TCEs) are important components of various optoelectronic devices and commonly used in solar cells, touch screens and other display technologies. The most widely used material for industrial applications of TCEs is indium tin oxide (ITO), which has a low sheet resistance of less than 100 Ω sq−1, and high optical transparency of ~90%. However, ITO-based TCEs are relatively expensive owing to the scarcity of the indium supply and the high sputtering processing costs. In addition, ITO films are brittle, which limits their application as flexible and stretchable components in future electronic devices. In order to address these concerns, various emerging materials such as graphene, carbon nanotubes (CNTs), conductive polymers, and metal NWs are being considered as alternatives to ITO. Among these candidate replacements, Group 11 metal NWs, especially silver NWs (Ag NWs) have garnered special interest owing to their excellent electrical and optical properties; and, solution-processability. Ag NWs are usually prepared and suspended in a solution and the resultant colloidal ink is used to coat plastic film or other substrates by spin-coating with Mayer bar or roll-to-roll processing to create transparent conducting sheets. Highly transparent and conductive Ag NW based thin films have been fabricated with a sheet resistance of <20 Ω sq−1 and a transmittance of ∼90%, which is similar to the performance of commercial ITO substrates. However, Ag NWs-based electrodes suffer from inherent limitations that restrict their applicability. One major issue is that Ag NWs are prone to oxidation, which limits their functional processability and lifetime. Coating the Ag NWs with a protective metal oxide (e.g. TiO2, SnO2, ZnO) has the potential to substantially improve the chemical, thermal and mechanical stabilities of Ag NWs. However, the preparation of a metal oxide protection coating usually requires depositing the metal oxide in a vacuum on a prepared film, which is not suitable for roll-to-roll continuous production of films with large areas. Fabrication of highly conductive and air-stable Ag NWs-based electrodes via an all-solution process for flexible and transparent applications remains a challenge. Here, we developed a nucleation mediated method using nanowire seeds for the selective synthesis of uniform Ag NWs via polyol syntheses. The seed-mediated polyol approach gives Ag NWs with high reproducibility (>90% in numerous repetitions of the synthesis), high processing efficiency (grams or more are possible for each synthesis run), and high aspect ratios (>2000), with average dimensions of L> 100 µm and D < 50nm.The Ag@TiO2 NWs subsequently created by surface modification of the Ag NWS have a substantially higher thermal stability than Ag NWs which have the same diameter, and can be annealed to 300 ˚C. Transparent conductive films can be prepared by simple vacuum filtration or by spin coating onto an appropriate filter paper and then by direct transfer to the desired glass or plastic substrate.Therefore, Ag@TiO2 nanowires are ideal candidates for transparent electrodes with good conductivity, high transmittance and low haze, and are demonstrated to be thermally and chemically stable for long-term applications.

Low-Temperature Solution Processed Random Silver Nanowire as a Promising Replacement for Indium Tin Oxide

Low-temperature Solution Processed Flexible Silver Nanowires/zno Composite Electrode with Enhanced Performance and Stability

Electrodeposited Silver Nanowire Transparent Conducting Electrodes for Thin-Film Solar Cells

Solution-processed Composite Electrodes Composed of Silver Nanowires and Aluminum-Doped Zinc Oxide Nanoparticles for Thin-Film Solar Cells Applications

Fabrication of silver nanowire transparent electrodes at room temperature

Fused silver nanowires with metal oxide nanoparticles and organic polymers for highly transparent conductors

Silver nanowire composite thin films as transparent electrodes for Cu(In,Ga)Se₂/ZnS thin film solar cells.

(Invited) Synthesis of Thermally and Chemically Stable Silver Nanowires for Transparent Electrode

Water-assisted formation of highly conductive silver nanowire electrode for all solution-processed semi-transparent perovskite and organic solar cells

Scalable coating and properties of transparent, flexible, silver nanowire electrodes

High-performance flexible Ag nanowire electrode with low-temperature atomic-layer-deposition fabrication of conductive-bridging ZnO film

Fully Solution Processed Semi-Transparent Perovskite Solar Cells with Spray Coated Silver Nanowires/zno Composite Top Electrode

Silver nanowires with semiconducting ligands for low-temperature transparent conductors

Benefits, Problems, and Solutions of Silver Nanowire Transparent Conductive Electrodes in Indium Tin Oxide (ITO)‐Free Flexible Solar Cells

All-solution-processed flexible semitransparent organic solar cells based on sprayed silver nanowire composites as top electrodes

Preparation of Device-Level ZnO-Covered Silver Nanowires Films and Their Applications as Sub-Electrode for Polymer Solar Cells

High Yield Preparation of Silver Nanowires by CuCl2-mediated Polyol Method and Application in Semitransparent Conduction Electrode

Improved Flexible Transparent Conductive Electrodes based on Silver Nanowire Networks by a Simple Sunlight Illumination Approach

Investigation of light transmission and scattering properties in silver nanowire mesh transparent electrodes

Conductivity Enhancement of Silver Nanowire Networks Via Simple Electrolyte Solution Treatment and Solvent Washing

Highly Transmittance, Mechanical, Thermally Stable Silver Nanowires Network Using ZnO Nanoparticles