Encapsulation of locally welded silver nanowire with water-free ALD-SbOx for flexible thin-film transistors

Jun Yang,Amin Bahrami,Xingwei Ding,Sebastian Lehmann,Kornelius Nielsch
DOI: https://doi.org/10.1063/5.0118500
IF: 4
2022-10-20
Applied Physics Letters
Abstract:Transparent conductive electrodes are essential in the application of flexible electronics. In this work, we successfully demonstrated a novel strategy for improving mechanical/electrical properties of indium tin oxide (ITO)-free flexible silver nanowire (Ag NW) thin films. To reduce the contact resistance of Ag NWs, an ethanol-mist was used to weld the cross junction of wires at room temperature. The nano-welded Ag NWs (W-Ag NWs) were then coated with an aluminum-doped ZnO (AZO) solution, which significantly reduce the roughness of the Ag NW thin film. Finally, an ultrathin SbO x thin film of 2 nm was deposited on the film surface using a water-free low-temperature atomic layer deposition technique to protect the W-Ag NW/AZO layer from water or oxygen degradation. The treated Ag NWs have a high transmittance of 87% and a low sheet resistance of about 15 Ω/sq, which is comparable with the ITO electrode's property. After 1000 cycles of bending testing, the W-Ag NW/AZO/SbO x film practically retains its initial conductivity. Furthermore, the samples were immersed in a solution with pH values ranging from 3 to 13 for 5 min. When compared to untreated Ag NWs or those coated with AlO x thin films, W-Ag NW/AZO/SbO x had superior electrical stability. The W-Ag NW/AZO/SbO x layer was integrated as a gate electrode on low-power operating flexible Ti-ZnO thin film transistors (TFTs). The 5% Ti-ZnO TFT has a field-effect mobility of 19.7 cm 2 V s −1 , an I on / I off ratio of 10 7 , and a subthreshold swing of 147 mV decade −1 .
physics, applied
What problem does this paper attempt to address?