Abstract:This paper reports a novel bi-stable structure for a radio frequency micro-electro-mechanical system (RF MEMS) switch. The structure is activated by an in-plane electrostatic actuator and adopts the Inertial Generated Timing Sequence (IGTS) method to latch, allowing the switch to turn on and off with a simple pulse signal. This design eliminates the need for a complex external control circuit and enables the switch to maintain the ON state at zero power consumption. Furthermore, the electrode shape is designed to reduce the driving voltage, thereby lowering the power consumption of the boost circuit. To test and verify the functionality of the bi-stable mechanism, a coplanar waveguide (CPW), which is separated from the actuation structure to reduce interference between the DC drive signal and the RF transmitted signal, is employed. Fabricated using a silicon-on-glass process with two lithographic masks, the RF MEMS switch achieves bi-stability with a single pulse signal of 18V for latching and 14V for unlatching. The measured insertion loss and isolation at 6 GHz are $-$ 0.28 dB and $-$ 36.68 dB, respectively. This switch exhibits low pull-in voltage, low power consumption, and simple control, holding potential for future RF systems tailored to wireless applications with an emphasis on low power consumption and system simplicity. 2024-0008

A Zero Static Power Consumption Bi-Stable RF MEMS Switch Based on Inertial Generated Timing Sequence Method

An Approach to Near Zero Power Bi-Stable Driving With a Simple Pulse Signal for RF MEMS Switch

Design and simulation of a novel electro-thermally actuated lateral RF MEMS latching switch for low power applications

A Low-Supply-voltage High-Power-handling Stacked SPDT Switch Based on Feedforward Capacitors.

A dielectric-bridge-type MEMS series contact switch for 0-10GHz applications

An Approach of Inertial Generated Timing Sequence for Bi-Stable MEMS Switches

Electro-thermally actuated RF MEMS switch for wireless communication.

SP4T RF MEMS Switch with Low Actuation Voltage

An Ultra-Broadband Contact-Capacitive RF MEMS Switch for 15-110GHZ Applications

Novel Multicontact Radio Frequency Microelectromechanical System Switch in High-Power–handling Applications

A Low-Voltage Lateral MEMS Switch with High RF Performance

Design and Fabrication of a Low Insertion Loss Capacitive RF MEMS Switch with Novel Micro-Structures for Actuation

Design of Broadband High-Frequency Multi-Throw RF-MEMS Switches

Design, optimization and simulation of a low-voltage shunt capacitive RF-MEMS switch

Low-voltage Micromachining-Based Scalable Optical Switch

Design and fabrication of X-band capacitive MEMS switches

Low Voltage, High Speed and Small Area In-Plane MEMS Switch

Rf Mems Switch and Its Applications

Design and Analysis of a Lateral Lateral DC-Contact MEMS RF Switch with High Performance

Realization of A Series Contact Mems Switch with Sion Dielectric Bridge

Nonvolatile Silicon Photonic MEMS Switch Based on Centrally-Clamped Stepped Bistable Mechanical Beams