Abstract:RF-MEMS technology is proposed as a key enabling solution for realising the high-performance and highly reconfigurable passive components that future communication standards will demand. In this work, we present, test and discuss a novel design concept for an 8-bit reconfigurable power attenuator, manufactured using the RF-MEMS technology available at the CMM-FBK, in Italy. The device features electrostatically controlled MEMS ohmic switches in order to select/deselect the resistive loads (both in series and shunt configuration) that attenuate the RF signal, and comprises eight cascaded stages (i.e. 8-bit), thus implementing 256 different network configurations. The fabricated samples are measured (S-parameters) from 10 MHz to 110 GHz in a wide range of different configurations, and modelled/simulated with Ansys HFSS. The device exhibits attenuation levels (S21) in the range from −10 dB to −60 dB, up to 110 GHz. In particular, S21 shows flatness from 15 dB down to 3–5 dB and from 10 MHz to 50 GHz, as well as fewer linear traces up to 110 GHz. A comprehensive discussion is developed regarding the voltage standing wave ratio, which is employed as a quality indicator for the attenuation levels. The margins of improvement at design level which are needed to overcome the limitations of the presented RF-MEMS device are also discussed.

Rf Mems Switch and Its Applications

Rf Mems Activities at Imetu

Intermodulation Distortion in MEMS Capacitive Switches under High RF Power

An Ultra-Broadband Contact-Capacitive RF MEMS Switch for 15-110GHZ Applications

Design of Broadband High-Frequency Multi-Throw RF-MEMS Switches

Novel design and analysis of RF MEMS shunt capacitive switch for radar and satellite communications

Electro-thermally actuated RF MEMS switch for wireless communication.

Design of A Novel Bulk Micro-Machined Rf Mems Switch

RF MEMS-CMOS Device Integration: An Overview of the Potential for RF Researchers

An Advanced Real Time Lead RF-MEMS Based Switch Design for AI Applications

RF-MEMS Switched Varactors for Medium Power Applications

Capacitive Rf MEMS Switch with Composite Beam

RF MEMS technology for next-generation wireless communications

A Low-Voltage Lateral MEMS Switch with High RF Performance

Power Handling Capability Enhanced RF MEMS Switch Using Modified-Width Cantilevers Structure

Design and fabrication of X-band capacitive MEMS switches

Design, optimization and simulation of a low-voltage shunt capacitive RF-MEMS switch

Novel Multicontact Radio Frequency Microelectromechanical System Switch in High-Power–handling Applications

RF-MEMS for future mobile applications: experimental verification of a reconfigurable 8-bit power attenuator up to 110 GHz

Research Status and Development Trend of MEMS Switches: A Review

Scalable Contact-Capacitive MEMS Switches with High Capacitance Ratio for Millimeter-Wave Applications