Abstract:Cu3SbSe4, featuring its earth-abundant, cheap, nontoxic and environmentally friendly constituent elements, can be considered as a promising intermediate temperature thermoelectric (TE) material. Herein, a series of p-type Bi-doped Cu3Sb1−xBixSe4 (x = 0–0.04) samples were fabricated through melting and hot pressing process, and the effects of isovalent Bi-doping on their TE properties were comparatively investigated by experimental and computational methods. TEM analysis indicates that Bi-doped samples consist of Cu3SbSe4 and Cu2−xSe impurity phases, which is in good agreement with the results of XRD, SEM and XPS. For Bi-doped samples, the reduced electrical resistivity (ρ) caused by the optimized carrier concentrations and enhanced Seebeck coefficient derived from the densities of states near the Fermi level give rise to a high power factor of ~ 1000 µWm−1 K−2 at 673 K for the Cu3Sb0.985Bi0.015Se4 sample. Additionally, the multiscale defects of Cu3SbSe4-based materials involving point defects, nanoprecipitates, amorphous phases and grain boundaries can strongly scatter phonons to depress lattice thermal conductivity (κlat), resulting in a low κlat of ~ 0.53 Wm−1 K−1 and thermal conductivity (κtot) of ~ 0.62 Wm−1 K−1 at 673 K for the Cu3Sb0.98Bi0.02Se4 sample. As a consequence, a maximum ZT value ~ 0.95 at 673 K is obtained for the Cu3Sb0.985Bi0.015Se4 sample, which is ~ 1.9 times higher than that of pristine Cu3SbSe4. This work shows that isovalent heavy element doping is an effective strategy to optimize thermoelectric properties of copper-based chalcogenides.

Ultralow Thermal Conductivity and Enhanced Figure of Merit for CuSbSe2 Via Cd-Doping

Ultralow Thermal Conductivity and Enhanced Figure of Merit for CuSbSe 2 via Cd-Doping

Unlocking the Potential of Cu3SbSe3: Ultralow Thermal Conductivity and Enhanced Thermoelectric Performance

Enhanced Thermoelectric Performance of CuSbSe2 Via Mn Doping

Enhancement of the thermoelectric properties of MnSb2Se4 through Cu resonant doping

Ultralow Lattice Thermal Conductivity and High Thermoelectric Figure of Merit in Dually Substituted Cu12Sb4S13 Tetrahedrites

Enhanced thermoelectric performance of BiCuSO by Pb doping and Se alloying

Enhancement of low-temperature thermoelectric performance via Pb doping in Cu3SbSe4

Enhanced Thermoelectric Properties of Cu 3 SbSe 4 Compounds Via Gallium Doping

Enhanced Thermoelectric Properties of Cu3SbSe4 Compounds by Isovalent Bismuth Doping

Enhancement of thermoelectric performance of Cu 1.98 Se by Pb doping

Enhanced thermoelectric performance of CoSbS via Se doping at dual Sb and S sites

Structural features and thermoelectric performance of Sb- and Bi-doped Cu2SnSe3 compounds

Ultra-low Thermal Conductivity and High Thermoelectric Performance Realized in a Cu3SbSe4 Based System

Realized High Power Factor and Thermoelectric Performance in Cu3SbSe4

Enhanced Thermoelectric Performance of Bi–Se Co-Doped Cu1.8S Via Carrier Concentration Regulation and Multiscale Phonon Scattering

Co-precipitation Synthesis of Sn And/or S Doped Nanostructured Cu3Sb1−xSnxSe4−ySy with a High Thermoelectric Performance

Ultralow Thermal Conductivity and Extraordinary Thermoelectric Performance Realized in Codoped Cu3SbSe4 by Plasma Spark Sintering

Doping-mediated stabilization of copper vacancies to promote thermoelectric properties of Cu2−xS

Enhanced Thermoelectric Performance of Bi–Se Co-Doped Cu 1.8 S via Carrier Concentration Regulation and Multiscale Phonon Scattering

Thermoelectric properties and thermal stability of Cd-doped Cu 2 Se thermoelectric materials