Abstract:As an eco-friendly thermoelectric material, Cu2SnSe3 has recently drawn much attention. However, its high electrical resistivity ρ and low thermopower S prohibit its thermoelectric performance. Herein, we show that a widened band gap and the increased density of states are achieved via S alloying, resulting in 1.6 times enhancement of S (from 170 to 277 μV/K). Moreover, doping In at the Sn site can cause a 19-fold decrease of ρ and a 2.2 times enhancement of S (at room temperature) due to both multivalence bands' participation in electrical transport and the further enhancement of the density of states effective mass, which allows a sharp increase in the power factor. As a result, PF = 9.3 μW cm–1 K–2 was achieved at ∼800 K for the Cu2Sn0.82In0.18Se2.7S0.3 sample. Besides, as large as 44% reduction of lattice thermal conductivity is obtained via intensified phonon scattering by In-doping-induced formation of multidimensional defects, such as Sn vacancies, dislocations, twin boundaries, and CuInSe2 nanoprecipitates. Consequently, a record high figure of merit of ZT = 1.51 at 858 K is acquired for Cu2Sn0.82In0.18Se2.7S0.3, which is 4.7-fold larger than that of pristine Cu2SnSe3.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.1c03120?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.1c03120</a>.Temperature dependence of Cp for Cu2SnSe3, Cu2SnSe2.7S0.3, and Cu2Sn0.82In0.18Se2.7S0.3; phase characterization for all investigated samples; temperature dependence of the ZT value for Cu2SnSe3–xSx and the repeatability of thermoelectric performance for Cu2Sn0.82In0.18Se2.7S0.3; calculation details of md*; optical band gaps for S-alloyed Cu2SnSe3; unfolded effective band structure of Cu2SnSe3; calculation of lattice thermal conductivity via the Debye–Callaway model; and the calculation details of thermopower-dependent thermoelectric properties (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c03120/suppl_file/nn1c03120_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Ultralow Thermal Conductivity and Enhanced Figure of Merit for CuSbSe 2 via Cd-Doping

Ultralow Thermal Conductivity and Enhanced Figure of Merit for CuSbSe2 Via Cd-Doping

Unlocking the Potential of Cu3SbSe3: Ultralow Thermal Conductivity and Enhanced Thermoelectric Performance

Enhanced Thermoelectric Properties of Cu3SbSe4 Compounds by Isovalent Bismuth Doping

Enhanced Thermoelectric Performance of Bi–Se Co-Doped Cu 1.8 S via Carrier Concentration Regulation and Multiscale Phonon Scattering

Enhanced Thermoelectric Properties of Cu 3 SbSe 4 Compounds Via Gallium Doping

Ultralow Lattice Thermal Conductivity and High Thermoelectric Figure of Merit in Dually Substituted Cu12Sb4S13 Tetrahedrites

Structural features and thermoelectric performance of Sb- and Bi-doped Cu2SnSe3 compounds

Enhanced Thermoelectric Performance of CuSbSe2 Via Mn Doping

Enhancement of low-temperature thermoelectric performance via Pb doping in Cu3SbSe4

Boosting Thermoelectric Performance of Cu 2 SnSe 3 via Comprehensive Band Structure Regulation and Intensified Phonon Scattering by Multidimensional Defects

Enhanced thermoelectric performance of BiCuSO by Pb doping and Se alloying

Enhancement of the thermoelectric properties of MnSb2Se4 through Cu resonant doping

Enhanced Thermoelectric Performance of Bi–Se Co-Doped Cu1.8S Via Carrier Concentration Regulation and Multiscale Phonon Scattering

Enhancement of thermoelectric performance of Cu 1.98 Se by Pb doping

Realized High Power Factor and Thermoelectric Performance in Cu3SbSe4

Enhancing the Thermoelectric Performance of Cu2se Via Ag Doping

Enhanced Thermoelectric Performance of Cu2Se Alloys by Simultaneous Engineering of Thermal and Electrical Transport Properties Through S and Te co‐doping

Thermoelectric properties and thermal stability of Cd-doped Cu 2 Se thermoelectric materials

Ultralow Thermal Conductivity and Extraordinary Thermoelectric Performance Realized in Codoped Cu3SbSe4 by Plasma Spark Sintering

Enhanced thermoelectric performance of CoSbS via Se doping at dual Sb and S sites