Abstract:Abstract This paper presents a small-size on-chip capacitively coupled digital isolator with superior Common Mode Transient Immunity (CMTI) and high operational speed performances. It employs a gate-cross-coupled common gate pre-amplifier with an active zero load and a high-pass filter before the pre-amplifier. By applying the proposed technique, the high-frequency gain retains to high value, while the low-frequency gain is greatly attenuated. The high-pass filter, which is designed based on the technology structure of the on-chip isolation capacitance, is applied to further cancel the influence of Common Mode Transient (CMT) and aid in the transmission of high-frequency signal. Furthermore, differential On-Off Keying (OOK) modulation is adopted to eliminate CMT noise. For the purpose of increasing the operation speed performances, the work utilizes the Voltage-Current high-speed comparator with fast feed-forward path as Schmitt trigger and level shift, and employs the envelop-comparator, integrator and filter as demodulator. Thus, it significantly reduces the propagation delay and speeds up the data rate. As a result, both high CMTI and operational speed performances are achieved simultaneously. Fabricated in a 0.18 µm isolated CMOS technology, the area of the isolation element, i.e., the capacitor is 2×104 µm2. The measurement results of a test chip are an over 162 kV/µs CMTI, a 230 Mbps data rate, a 6 ns propagation delay, a 1.5 mA dynamic current and 14 kV isolation breakdown voltage. The characteristics are superior to those of conventional digital isolators.

Novel Integrated Low Capacitance Transient Voltage Suppressor Array with Capacitance Equalization Technique for System-Level EOS/ESD Protection

A Capacitively Coupled Digital Isolator with CMTI of 162 kV/μs and Data Rate of 230 Mbps

A Capacitively Coupled Digital Isolator Using Multiple-Pulse-coding Architecture with CMTI of 200kv/μs and Static Current of 60Μa.

A Capacitively Coupled Digital Isolator Using Multiple-pulse-coding Architecture with CMTI of 200 Kv/μs and Static Current of 60 Μa

Novel Multifunctional Transient Voltage Suppressor Technology for Modular EOS/ESD Protection Circuit Designs

An Investigation on Capacitance-Trigger ESD Protection Devices for High Voltage Integrated Circuits

A Novel Capacitance-Coupling-Triggered SCR for Low-Voltage ESD Protection Applications

An Ultralow‐capacitance Bidirectional Punch‐through Transient Voltage Suppressor

Electro-Thermo-Mechanical Investigation On Multi-Level Interconnects In The Presence Of An Esd Pulse

A capacitance coupling complementation SCR for on-chip electrostatic discharge protection

Evaluation of RF electrostatic discharge (ESD) protection in 0.18-μm CMOS technology

A Novel On-Chip Electrostatic Discharge Protection Design for Rf Ics

A Novel and Powerful TCAD Methodology to Evaluate Performance of ESD Protection Devices

Novel Capacitance Coupling Complementary Dual-Direction SCR for High-Voltage ESD

System Efficient ESD Design of IO ESD Protection

A novel straight through-MOS-triggered SCR for on-chip ESD protection

New Electrostatic Discharge Protection Device for VBO High Speed Chip

FOD Based ESD Protection Devices in Deep Sub-micron Technology

Novel Electrostatic Discharge Protection Design Method

Design of a Novel Static-Triggered Power-Rail ESD Clamp Circuit in a 65-Nm CMOS Process

A novel gate-suppression technique for ESD protection.