Abstract:As process technologies advance into deep sub-micrometer and nanometer scale, the charged device model (CDM) is now considered an important stress model for defining electrostatic discharge (ESD) reliability of integrated circuits. Thus the turn-on time of the ESD elements used in the protection circuit becomes important. At this time, there is no good method to evaluate the CDM ESD device turn-on speed. Equipment like VF-TLP and CC-TLP are too complicated and not precise for this purpose. A new method to evaluate the ESD device turn-on speed is presented in this paper. Based on this novel approach, some CDM ESD devices are analyzed based on the transmission line pulsing (TLP) tester. The designed devices include diodes, grounded-gate NMOS, SCRpsilas (silicon controlled rectifier), and Modified-Lateral SCRpsilas (MLSCR). The rising time of the pulse is set at 200 psec to accurately simulate real CDM pulses. The time-dependent voltage and current data are extracted and calculated from each pulse in the Time Domain Reflection (TDR) TLP tester. Two new ESD turn-on conditions are proposed and defined based on the transient currents in order to compare the relative speed of different ESD devices. The results show that the normalized turn-on time of different devices with various sizes and finger numbers do not correlate well with that obtained under the normal DC conditions, and the same device shows different turn-on characteristics under different pulses. These results enable devices to be designed for improved CDM ESD protection levels, and the present method can be used for ESD design for future nanometer technologies.

Evaluation of RF electrostatic discharge (ESD) protection in 0.18-μm CMOS technology

Investigation on Bi-directional SCR ESD Protection Devices in a 0.18 μm RF CMOS Process

Low-Capacitance SCR Structure for RF I/O Application

Whole Chip ESD Protection Design for 2.4 GHz LNA

Analysis of 65 Nm Technology Grounded-Gate NMOS for On-Chip ESD Protection Applications

Whole Chip Esd Protection for 2.4 Ghz Lna

Investigation of Turn-on Speeds of Electrostatic Discharge Protection Devices Using Transmission-Line Pulsing Technique

A novel straight through-MOS-triggered SCR for on-chip ESD protection

A capacitance coupling complementation SCR for on-chip electrostatic discharge protection

FOD Based ESD Protection Devices in Deep Sub-micron Technology

Comparative Study of Reliability Degradation Behaviors of LDMOS and LDMOS-SCR ESD Protection Devices

Vertical Silicon-Controlled Rectifier for ESD Protection under 28nm Ps Process

Very Small Snapback Silicon-Controlled Rectifier for Electrostatic Discharge Protection in 28 Nm Processing.

A Robust Polysilicon-Assisted SCR in ESD Protection Application

Design Analysis of a Novel Low Triggering Voltage Dual Direction SCR ESD Device in 0. 18μm Mixed Mode RFCMOS Technology

Improved Low-Voltage-Triggered Scr Structure for Rf-Esd Protection

Low-parasitic ESD Protection Strategy for RF ICs in 0.35μm CMOS Process

A Novel Dual-Directional DTSCR in Twin-Well Process for Ultra-Low-voltage ESD Protection

On the ESD Protection and Non-Fatal ESD Strike on Nano CMOS Devices

Effect of poly-silicon gate on ESD protection performance of LDMOS-SCR devices

An Investigation on Capacitance-Trigger ESD Protection Devices for High Voltage Integrated Circuits