Abstract:Continuously scaling down and decreasing operation voltages of ICs, from the 5 V TTL-compatible voltage to 3.3 V, then 1.2 V, and now 0.8 V for low-power ICs, results in more stringent electrostatic discharge protection design requirements, such as a narrow ESD design window, low operation voltage, and high ESD robustness. Based on traditional diode string and diode-triggered silicon-controlled rectifiers, an enhanced diode-triggered silicon-controlled rectifier is proposed to meet the requirements of low-voltage integrated circuits as bidirectional electrostatic discharge protection. The new device employs an additional PMOS and NMOS in the N-well and P-well, respectively, to offer additional current paths along the surface to significantly enhance its robustness. TCAD simulation shows that the device is triggered by both the diode strings and embedded MOS, making the device turn on faster and the current distribution more uniform during the ON state owing to the additional surface current paths. The proposed new device has excellent dual-directional ESD protection performance with a figure of merit of 4.01 mA/um2, which is about a 71% improvement compared with the conventional diode-triggered silicon-controlled rectifier. It also has higher area efficiency, lower trigger voltage, lower current leakage, and a faster turn-on speed. The proposed enhanced diode-triggered silicon-controlled rectifier is an attractive ESD protection solution for ultra-low-voltage ICs.

New Electrostatic Discharge Protection Device for VBO High Speed Chip

Investigation on Bi-directional SCR ESD Protection Devices in a 0.18 μm RF CMOS Process

Vertical Silicon-Controlled Rectifier for ESD Protection under 28nm Ps Process

ESD Protection Design for VBO-based High-speed Multimedia Interface Chip

Very Small Snapback Silicon-Controlled Rectifier for Electrostatic Discharge Protection in 28 Nm Processing.

Analysis of 65 Nm Technology Grounded-Gate NMOS for On-Chip ESD Protection Applications

High-performance Electrostatic Discharge Protection Device for Power Chip Based on 28 Nm Process

Design Analysis of a Novel Low Triggering Voltage Dual Direction SCR ESD Device in 0. 18μm Mixed Mode RFCMOS Technology

High Area Efficiency Bidirectional Silicon-Controlled Rectifier for Low-Voltage Electrostatic Discharge Protection

Design and Analysis of an Area-Efficient High Holding Voltage ESD Protection Device

A Novel Dual-Directional DTSCR in Twin-Well Process for Ultra-Low-voltage ESD Protection

An Improved Ggnmos Triggered Scr for High Holding Voltage Esd Protection Applications

An Area-Efficient LDMOS-SCR ESD Protection Device for the I/O of Power IC Application

28 Nm CMOS Process ESD Protection Based on Diode-Triggered Silicon Controlled Rectifier

ESD protection design of DDSCR structure based on the 0.5 BCD process

Evaluation of RF electrostatic discharge (ESD) protection in 0.18-μm CMOS technology

FOD Based ESD Protection Devices in Deep Sub-micron Technology

Improved LDMOS for ESD Protection of High Voltage BCD Process

Improvement on Diode String Structure for 65-Nm RF ESD Protection

A Novel DTSCR Structure with High Holding Voltage and Enhanced Current Discharge Capability for 28 nm CMOS Technology ESD Protection

Investigation of Boundary-Mos-triggered SCR Structures for On-Chip ESD Protection