Abstract:The trigger voltage walk-in effect has been investigated by designing two different laterally diffused metal—oxide—semiconductor (LDMOS) transistors with an embedded silicon controlled rectifier (SCR). By inserting a P+ implant region along the outer and the inner boundary of the N+ region at the drain side of a conventional LDMOS transistor, we fabricate the LDMOS-SCR and the SCR-LDMOS devices with a different triggering order in a 0.5 μm bipolar-CMOS-DMOS process, respectively. First, we perform transmission line pulse (TLP) and DC-voltage degradation tests on the LDMOS-SCR. Results show that the trigger voltage walk-in effect can be attributed to the gate oxide trap generation and charge trapping. Then, we perform TLP tests on the SCR-LDMOS. Results indicate that the trigger voltage walk-in effect is remarkably reduced. In the SCR-LDMOS, the embedded SCR is triggered earlier than the LDMOS, and the ESD current is mainly discharged by the parasitic SCR structure. The electric potential between the drain and the gate decreases significantly after snapback, leading to decreased impact ionization rates and thus reduced trap generation and charge trapping. Finally, the above explanation of the different trigger voltage walk-in behavior in LDMOS-SCR and SCR-LDMOS devices is confirmed by TCAD simulation.

An Improved Ggnmos Triggered Scr for High Holding Voltage Esd Protection Applications

Design and Analysis of an Area-Efficient High Holding Voltage ESD Protection Device

Silicon-Controlled Rectifier Stacking Structure for High-Voltage ESD Protection Applications

High-Holding-Voltage Silicon-Controlled Rectifier for ESD Applications

Analysis of 65 Nm Technology Grounded-Gate NMOS for On-Chip ESD Protection Applications

High Holding Voltage Scr for Robust Electrostatic Discharge Protection

RC-Embedded LDMOS-SCR with High Holding Current for High-Voltage I/O ESD Protection

Gate-Controlled LVTSCR for High-Voltage ESD Protections in Advanced CMOS Processes

An Investigation on Capacitance-Trigger ESD Protection Devices for High Voltage Integrated Circuits

Investigation of the Trigger Voltage Walk-In Effect in Ldmos for High- Voltage Esd Protection

Design of Dual-Directional SCR Structure With High Holding Voltage and Low Dynamic Resistance for High Voltage ESD Protection

A Modified LDMOS Device with Improved ESD Protection Performance

A Novel Capacitance-Coupling-Triggered SCR for Low-Voltage ESD Protection Applications

A novel Electrostatic Discharge protection design based on SCR

Very Small Snapback Silicon-Controlled Rectifier for Electrostatic Discharge Protection in 28 Nm Processing.

Novel Capacitance Coupling Complementary Dual-Direction SCR for High-Voltage ESD

Investigation on Bi-directional SCR ESD Protection Devices in a 0.18 μm RF CMOS Process

A Double Snapback SCR ESD Protection Scheme for 28 Nm CMOS Process.

A novel straight through-MOS-triggered SCR for on-chip ESD protection

An Area-Efficient LDMOS-SCR ESD Protection Device for the I/O of Power IC Application

Novel High Holding Voltage SCR with Embedded Carrier Recombination Structure for Latch-up Immune and Robust ESD Protection