Abstract:With the advancement of semiconductor manufacturing technology, thin film structures were widely used in MEMS devices. These films played critical roles in providing support, reinforcement, and insulation in MEMS devices. However, due to their microscopic dimensions, the sensitivity of their parameters and performance to thermal stress increased significantly. In this study, a Pirani gauge sample with a multilayer thin film structure was designed and fabricated. Based on this sample, finite element modeling analysis and thermal stress experiments were conducted. The finite element modeling analysis employed a combination of steady-state and transient methods to simulate the deformation and stress distribution of the device at room temperature (25 °C), low temperature (−55 °C), and high temperature (125 °C). The thermal stress test involved placing the sample in a temperature cycling chamber for temperature cycling tests. After the tests, the resonant frequency and surface deformation of the device were measured to quantitatively evaluate the impact of thermal stress on the deformation and resonant frequency parameters of the device. After the experiments, it was found that the clamped-end beams made of Pt were a stress concentration area. Additionally, the repetitive thermal load caused the cantilever beam to move cyclically in the Z direction. This movement altered the deformation of the film and the resonant frequency. The suspended film exhibited concavity, and the overall trend of the resonant frequency was downward. Over time, this could even lead to the fracture of the clamped-end beams. The variation of mechanical parameters derived from finite element simulations and experiments provided an important reference value for device design improvement and played a crucial role in enhancing the reliability of thin film devices.

Design, Fabrication And Measurement Of Tan Thin Film Resistor Based On Mems Technology

Virtual instrumentation based automatic thin film resistivity measurement system

Design and Development of Novel Electroplating Spring Frame Mems Structure Specimens for the Microtensile Testing of Thin Film Materials

Fabrication and Performance of a Ta2O5 Thin Film pH Sensor Manufactured Using MEMS Processes

Tunable Terahertz Metamaterial with Electromagnetically Induced Transparency Characteristic for Sensing Application

Tini-Based Thin Films in Mems Applications: A Review

Monotonic and fatigue testing of spring-bridged freestanding microbeams application for MEMS

Process Development Of Negative Tone Dry Film Photoresist For Mems Applications

A thin-film temperature sensor based on a flexible electrode and substrate

Fabrication of monolithic integrated bimaterial resonant uncooled IR sensor

CMOS-MEMS Thermal-Piezoresistive Resonators and Oscillators for Sensors

Study on matching resistor of 40Gb/S high-speed submounts

Highly Sensitive, Flexible MEMS Based Pressure Sensor with Photoresist Insulation Layer.

Novel Absorber Membrane and Thermocouple Designs for CMOS-MEMS Thermoelectric Infrared Sensor

Novel High Thermal Resistance Structure Design for Responsivity and Detectivity Enhancements of Cmos Mems Thermoelectric Infrared Sensor

Variation of MEMS Thin Film Device Parameters under the Influence of Thermal Stresses

Vertically Integrated Cmos-Mems Capacitive Humidity Sensor And A Resistive Temperature Detector For Environment Application

Design and Measurement of Microelectromechanical Three-Axis Magnetic Field Sensors Based on the CMOS Technique

A Novel Micro Tensile Testing Instrument with Replaceable Testing Specimen by Parylene Passivation Technique

Design And Realize Of 3d Integration Of A Pressure Sensor System With Through Silicon Via (Tsv) Approach

TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (cat. No.03TH8664)