Abstract:The present work characterizes mechanical (elastic and plastic) properties and residual stresses of a Ni-Co thin film having 10 m thickness. Mechanical properties are obtained from direct-tension testing together with elastic finite element analysis. Membrane and bending components of residual stresses are measured using micro-cantilever and T-structure tests, respectively. Introduction Measurement of residual stresses in thin films is quite important, as their effect on mechanical integrity of micro-electrical-mechanical components could be significant. A number of measurement methods are available [1-7], but a majority of methods deal with measuring averaged residual stresses, rather than thickness-variation of residual stresses in thin films. Although such thickness variation could be often insignificant due to the fact that the thickness is very small, residual stresses can vary along the thickness of thin films. Measuring thickness variations of residual stresses, however, are not straightforward. A sectioning method can be applied (see for instance Ref. [7]), but can be quite tedious. In this respect, a simple method to measure thickness variations is desirable. In designing (macroscopic) structures, a stresses categorization process from stresses in the thickness direction is popularly employed [8-10]. In the stresses categorization process, stresses in the thickness direction are decomposed into the primary, secondary and peak stresses. Primary stresses are ones resulting mechanical loads and dead weights. Secondary stresses include thermal and residual stresses. Both primary and secondary stresses are typically idealized as a sum of (constant) membrane and (linear) bending stress components. Remaining stresses are classified as the peak stress, which relaxes quickly with plastic deformation by definition. A message that can be learnt from conventional stresses categorization process is that determination of membrane and bending components of residual stresses would be sufficient from mechanical integrity point of view. This paper presents measurement of residual stresses in Ni-Co thin films. A linearly-varying residual stress across the film thickness is assumed. To measure its bending and membrane components, cantilever beam and T-structure beam specimens are used, respectively. Experiments Material and Specimen Fabrication A NiCo thin film is recently widely used for MEMS devices using LIGA processes. Fabrication processes of NiCo thin film specimens are schematically shown in Fig. 1. For tensile test, conventional “dogbone” tensile test specimens were fabricated. Furthermore, for residual stress analysis, specimens of T-type structure and cantilever beams (which will be discussed later in this paper) with various dimensions were also fabricated. A single-side

Tini-Based Thin Films in Mems Applications: A Review

Tini Film Based Shape Memory Alloy and Microactuators

Design, Fabrication And Measurement Of Tan Thin Film Resistor Based On Mems Technology

Micro/Nanotribological and Mechanical Studies of Tin Thin-Film for Mems Applications

TiN Membrane for MEMS Applications

A Critical Review on Nickel–Titanium Thin-Film Shape Memory Alloy Fabricated by Magnetron Sputtering and Influence of Process Parameters

Monotonic and fatigue testing of spring-bridged freestanding microbeams application for MEMS

On the Lower Thickness Boundary of Sputtered Tini Films for Shape Memory Application

Materials: Silicon and beyond

TEM study of the Ni-Ti shape memory micro-wire

Tini Shape Memory Alloy Based Micropumps

Thinning and Shaping Solid Films into Functional and Integrative Nanomembranes

Nano-indentation and nano-scratching of pure nickel and NiTi shape memory alloy thin films: an atomic-scale simulation

Technique of TiNi-based shape memory alloy thin film coated on optical fibers

Scalable fabrication of carbon-based MEMS/NEMS and their applications: a review

Integration of Electrodeposited Ni-Fe in MEMS with Low-Temperature Deposition and Etch Processes

Micro selective laser melting of NiTi shape memory alloy: Defects, microstructures and thermal/mechanical properties

Microactuators of Free-Standing Tinicu Films

Characterization of Mechanical Properties and Residual Stresses for Ni-Co Thin Films

In-Situ Tem Study of the Thickness Impact on the Crystallization Features of A Near Equal-Atomic Tini Thin Film Prepared by Planar Magnetron Sputtering

Thickness uniformity, electrical properties, and stress of sputtered TiN thin films