Abstract:Ti-Ta thin films exhibit properties that are of interest for applications as microactuators and as biomedical implants. A Ti-Ta thin film materials library was deposited at T = 25 °C by magnetron sputtering employing the combinatorial approach, which led to a compositional range of Ti87Ta13 to Ti14Ta86. Subsequent high-throughput characterization methods permitted a quick and comprehensive study of the crystallographic, microstructural, and morphological properties, which strongly depend on the chemical composition. SEM investigation revealed a columnar morphology having pyramidal, sharp tips with coarser columns in the Ti-rich and finer columns in the Ta-rich region. By grazing incidence X-ray diffraction four phases were identified, from Ta-lean to Ta-rich: ω phase, α″ martensite, β phase, and a tetragonal Ta-rich phase (Ta(tetr)). The crystal structure and microstructure were analyzed by Rietveld refinement and clear trends could be determined as a function of Ta-content. The lattice correspondences between β as the parent phase and α″ and ω as derivative phases were expressed in matrix form. The β ⇌ α″ phase transition shows a discontinuity at the composition where the martensitic transformation temperatures fall below room temperature (between 34 and 38 at. % Ta) rendering it first order and confirming its martensitic nature. A short study of the α″ martensite employing the Landau theory is included for a mathematical quantification of the spontaneous lattice strain at room temperature (ϵ̂max = 22.4(6) % for pure Ti). Martensitic properties of Ti-Ta are beneficial for the development of high-temperature actuators with actuation response at transformation temperatures higher than 100 °C.

In-Situ Tem Study of the Thickness Impact on the Crystallization Features of A Near Equal-Atomic Tini Thin Film Prepared by Planar Magnetron Sputtering

The Characterization of Crystalline Particle Growth in Tini Thin Films

Nickel Induced Crystallization of Amorphous Silicon Thin Films

An in Situ TEM Study of the Size Effect on the Thermally Induced Martensitic Transformation in Nanoscale NiTi Shape Memory Alloy

Formation Of Nanocrystalline Tin Film By Ion-Beam-Enhanced Deposition

The Behavior of Crystalline Grain Growth in TiNi Shape Memory Alloy Thin Films

Crystallization behavior of amorphous phase in the Ti-Ni-Ta surface alloy synthesized on TiNi substrate by electron-beam method

FABRICATION AND CHARACTERIZATION OF FUNCTIONALLY GRADED Ni–Ti MULTILAYER THIN FILMS

An In-Situ TEM Investigation on Microstructure Evolution of Ni-25 At.% Al Thin Films

Investigation of microstructure evolution in Pt-doped TiO2 thin films deposited by rf magnetron sputtering

In Situ Synchrotron X-ray Diffraction Analysis of Deformation Behaviour in Ti-Ni-based Thin Films.

The Crystallization Kinetics Study of Finemet-Co Amorphous Alloys

Effect of processing conditions on microstructure and electrical characteristics of Ni thin films

X-ray photoelectron spectroscopy analysis of the effect of thickness on the transformation temperature of NiTi alloy thin films

In situ TEM observations of thickness effect on grain growth in pure titanium thin films

X-ray Diffraction and High Resolution Transmission Electron Microscopy Characterization of Intermetallics Formed in Fe/Ti Nanometer-Scale Multilayers During Thermal Annealing

Synthesis and characterization of nanocrystalline Ti(1-x)Al(x)N by reactive magnetron sputtering

In-Situ XAFS Investigation of the Crystallization Mechanism of Ni-B Nano-Amorphous Alloy

Interface and crystallization evolution induced by reactive nitrogen and oxygen sputtering in Ni/Ti multilayer

Crystallographic Structure Analysis of a Ti–Ta Thin Film Materials Library Fabricated by Combinatorial Magnetron Sputtering

In situ study of non-equilibrium solidification of CoCrFeNi high-entropy alloy and CrFeNi and CoCrNi ternary suballoys