Abstract:This study investigated the collective evolution of martensite variant structures, the development of crystallographic textures and the load partitioning among the variants during tensile deformation in a commercial polycrystalline NiTi wire by means of in-situ high-energy X-ray diffraction technique. The cold-worked and then crystallized NiTi wire was found to have three fiber textures along the wire axial direction in its thermally formed self-accommodating B19′ martensite, including (<math>1¯</math>20)/(120), (<math>1¯</math>02) and (102). These textural orientations are inheritance of the texture of the B2 phase and are associated with the <011> type II twins and (001) compound twins. Tensile deformation via martensite variant reorientation converted the (102) and (120) fiber textures into (<math>1¯</math>02). The texture evolutions and variant selections are driven by the difference in d-spacing values between the pairing variants in each twin structure in order to achieve maximum elongation deformation in the tensile loading direction. At the meantime, the lattice strains of the favored variants increased whereas those of the unfavored variants decreased (even to negative) abruptly at the occurrence of the Lüders deformation event when at the global stress remained constant over the stress plateau. These changes of the lattice strains are attributed to load transfer and repartitioning among the variants. Based on the lattice strain measurements, the load partitioning among variants is also estimated.

In Situ Synchrotron X-ray Diffraction Analysis of Deformation Behaviour in Ti-Ni-based Thin Films.

In-situ Synchrotron X-ray Diffraction Study of Stress-Induced Phase Transformation in Ti50.1Ni40.8Cu9.1 Thin Films

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

In Situ Synchrotron X-ray Diffraction Study of Deformation Behaviour of a Metastable Β-Type Ti-33Nb-4Sn Alloy

In-situ high energy X-ray diffraction study of microscopic deformation behavior of martensite variant reorientation in NiTi wire

Structure of martensite in deformed Ti–Ni–Cu thin films

In-situ synchrotron X-ray diffraction investigation on deformation behavior of Nb/NiTi composite during pre-straining process

In-situ Synchrotron Diffraction Study on the Anisotropic Deformation and Phase Transformation Behaviors in NiTi Shape Memory Alloy Fabricated by Laser Powder Bed Fusion

In-situ synchrotron high energy X-ray diffraction study of micro-mechanical behaviour of R phase reorientation in nanocrystalline NiTi alloy

Investigation on Mechanical Properties of Deformation TiNi Thin Films

Insitu Neutron Diffraction Study of Micromechanical Interaction and Phase Transformation in Dual Phase Niti Alloy During Tensile Loading

In Situ Synchrotron X-ray Diffraction Study of Deformation Behavior and Load Transfer in a Ti2Ni-NiTi Composite

High-energy X-ray Diffuse Scattering Studies on Deformation-Induced Spatially Confined Martensitic Transformations in Multifunctional Ti–24Nb–4Zr–8Sn Alloy

In Situ X-ray Diffraction Analysis on the Crystallization of Amorphous Ti–Ni Thin Films

In-situ Synchrotron Diffraction Study of the Localized Phase Transformation and Deformation Behavior in NiTi SMA

In-situ high energy X-ray diffraction study of deformation behavior in Nb nanoparticle-martensitic NiTi composite wire

In Situ Synchrotron X-ray Diffraction Investigations of the Nonlinear Deformation Behavior of a Low Modulus Β-Type Ti36Nb5Zr Alloy

Effect of deformation on the stability of stress-induced martensite in nanocrystalline NiTi shape memory alloy

Analysis of Mechanical-Thermal Coupled Experiments of Single Crystal TiNi Alloys

Crack propagating and stress-promoted the precipitate of Ni3Ti in NiTi thin films

EBSD studies of the stress-induced B2–B19′ martensitic transformation in NiTi tubes under uniaxial tension and compression