In-situ synchrotron high energy X-ray diffraction study of micro-mechanical behaviour of R phase reorientation in nanocrystalline NiTi alloy

Bo Feng,Xiangguang Kong,Shijie Hao,Yinong Liu,Ying Yang,Hong Yang,Fangmin Guo,Daqiang Jiang,Taotao Wang,Yang Ren,Lishan Cui

DOI: https://doi.org/10.1016/j.actamat.2020.05.004

IF: 9.4

2020-08-01

Acta Materialia

Abstract:This study investigated the mechanisms and temperature dependence of the R phase variant reorientation deformation in a nanocrystalline NiTi wire by means of in-situ synchrotron high-energy X-ray diffraction technique during tensile deformation. The NiTi wire exhibited a single stage B2 → R transformation upon cooling with the R → B19′ martensitic transformation completely suppressed down to the liquid nitrogen temperature. The R phase variant reorientation deformation in tension was revealed to proceed in a Lüders-manner, as evidenced by sudden changes of diffraction peak intensity and increases of lattice elastic strains of the R phase during the deformation. The variant reorientation obeys the principles to yield maximum crystallographic strain in the direction of the applied load. Thus, the variants with larger d-spacing values aligned to the axis of tension grew at the expense of those of lower d-spacing values. The increases of lattice elastic strains are attributed to the internal load transfer among the different crystallographic variants during the R phase reorientation. The crystallographic strain of R phase reorientation was found to increase with decreasing the deformation temperature. This corresponds directly to the continued evolution of the structure of the R phase of increased structural distortion relative the B2 phase with decreasing the temperature. This reflects the second order nature of the R phase.

materials science, multidisciplinary,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to explore the microscopic mechanism of R - phase variant re - orientation in nanocrystalline NiTi alloys and its temperature dependence. Specifically, through in - situ synchrotron radiation high - energy X - ray diffraction technology, the study conducted an in - depth analysis of the R - phase variant re - orientation behavior in nanocrystalline NiTi wires during tensile deformation. The study focused on the crystallographic orientation evolution and d - spacing strain during the R - phase variant re - orientation process, as well as the influence of temperature on the R - phase crystal structure and re - orientation strain. This research aims to fill the gaps in the existing literature regarding the knowledge of the microscopic mechanisms of R - phase transformation and re - orientation, especially in the case where there is less understanding of this phenomenon in nanocrystalline materials.

In-situ synchrotron high energy X-ray diffraction study of micro-mechanical behaviour of R phase reorientation in nanocrystalline NiTi alloy

In-situ high energy X-ray diffraction study of microscopic deformation behavior of martensite variant reorientation in NiTi wire

In-situ synchrotron high energy X-ray diffraction study of spontaneous reorientation of R phase upon cooling in nanocrystalline Ti50Ni45.5Fe4.5 alloy

In-situ high energy X-ray diffraction study of deformation behavior in Nb nanoparticle-martensitic NiTi composite wire

Insitu Neutron Diffraction Study of Micromechanical Interaction and Phase Transformation in Dual Phase Niti Alloy During Tensile Loading

In-situ Synchrotron Diffraction Study on the Anisotropic Deformation and Phase Transformation Behaviors in NiTi Shape Memory Alloy Fabricated by Laser Powder Bed Fusion

In-Situ High-Energy Synchrotron X-Ray Diffraction Study of Micromechanical Behavior of Multiple Phases in Ni47ti44nb9 Shape Memory Alloy

R-Phase Transformation Evolution in NiTi SMA Wires Studied via the Internal Friction Technique

Synchrotron-based Multiscale Study on Phase Transformation in a Cold-Rolled NiTi Shape Memory Alloy: Effects of Preexisting Defects

In Situ Synchrotron X-ray Diffraction Analysis of Deformation Behaviour in Ti-Ni-based Thin Films.

Revealing the microstructure evolution of the deformed superelastic NiTi wire by EBSD

The influence of dislocations on R-phase transformations in a NiTi shape memory alloy

Abnormal superelastic cyclic behavior and stress-induced martensitic transformation mechanism of NiTi alloy with R phase

Effect of deformation on the stability of stress-induced martensite in nanocrystalline NiTi shape memory alloy

Atomistic Simulation of Microstructure Evolution of NiTi Single Crystals in Bending Deformation

Atomistic Study of Temperature and Strain Rate-Dependent Phase Transformation Behaviour of Niti Shape Memory Alloy under Uniaxial Compression

In-situ Synchrotron Diffraction Study of the Localized Phase Transformation and Deformation Behavior in NiTi SMA

Effect of Plane Strain Compression and Subsequent Recrystallization Annealing on Microstructures and Phase Transformation of NiTiFe Shape Memory Alloy

In situ TEM studies of the stress-induced martensitic transformation in nanometric NiTi polycrystal strips

Step-wise R phase transformation rendering high-stability two-way shape memory effect of a NiTiFe-Nb nanowire composite

Microstructural Evolution in NiTi Alloy Subjected to Surface Mechanical Attrition Treatment and Mechanism