Abstract:The trade-off between the safety and effectiveness of NiTi wire in practical applications has consistently hindered its advancement. This underscores the significance of adjusting its microstructure via appropriate heat-treatment techniques. This study systematically investigates the evolution of the constitution phases of the matrix and the grain size as the aging time increases from three minutes to three hours at 550 °C for Ni50.9Ti49.1 wire, and highlights the significant role of the R phase in static/cyclic tensile failure behavior. When aged for thirty minutes, the matrix consists mainly of the B2 phase, similar to the as-received wire, while it tends to transform into the R phase during loading (intermediate-R phase). In contrast, aging for three hours leads to the formation of the R phase as the matrix phase (matrix-R phase). The two types of R phase are discussed and compared in detail with regard to their contribution to the static/cyclic tensile failure behaviour. The longest fatigue life was obtained in wires with the R phase as the matrix phase, which was due to the combined effect: (i) the rapid attainment of a stable state so as to minimise the extent of phase transformation; (ii) coordination deformation of twin and dislocation to alleviate stress concentration; (iii) and the strong bonding between Ti2Ni and the matrix that reduces the occurrence of the "stretching into the hole-coalescence-microcrack process". The enhanced flexibility observed in the wire with matrix-R phase is due to its reduced elastic modulus and lower transformation plateau. The increase in plasticity is linked to changes in the wire's fracture behavior resulting from grain growth. Such microstructural changes allow the alloy wire to exhibit a more uniform plastic deformation under stress, which in turn postpones the onset of significant fracturing.

Investigation of the Ageing-Induced R-phase and Its Impact on Static/cyclic Tensile Failure in Ni50.9Ti49.1 Wire

R-Phase Transformation Evolution in NiTi SMA Wires Studied via the Internal Friction Technique

Exceptional fatigue resistant NiTi wire mediated by R-phase

Microstructure of Surface and Subsurface Layers of a Ni-Ti Shape Memory Microwire.

Effect of Aging on Martensitic Transformation and Superelasticity of TiNiCr Shape Memory Alloy

Structure, Martensitic Transformations, and Mechanical Properties of Aging Nanocrystalline Ti–50.9 at % Ni Alloy

In-situ synchrotron high energy X-ray diffraction study of micro-mechanical behaviour of R phase reorientation in nanocrystalline NiTi alloy

The Effects of Ti3Ni4 Precipitates on the R-phase Transformation

Effect of Aging Treatment on Superelasticity of a TiNiV Alloy

Study on phase transformation, internal stress and texture evolution of cold drawn Nb nanowire-NiTi composite wires upon annealing

In-situ high energy X-ray diffraction study of microscopic deformation behavior of martensite variant reorientation in NiTi wire

Effect of Aging Treatment on Superelasticity of A Ti48.8ni50.8v0.4 Alloy

Effect of carbon addition on the microstructure and mechanical behavior of near equiatomic NiTi alloy wire

Tensile Deformation of Superelastic NiTi Wires in Wide Temperature and Microstructure Ranges

Effect of Heat Treatment on Fatigue Behaviour of Biomedical Ni–Ti Alloy Wires under Ultrasonic Conditions

Microstructure, Phase Transformation Behavior and Tensile Superelasticity of NiTi Shape Memory Alloys Fabricated by the Wire-Based Vacuum Additive Manufacturing

Accelerated improvement in tensile superelasticity of electron beam directed energy deposition manufactured NiTi alloys by artificial thermal cycling combined with low temperature aging treatment

Martensitic transformation induced by cooling NiTi wire under various tensile stresses: Martensite variant microstructures, textures, recoverable strains and plastic strains

Effect of Ageing Treatment on the Deformation Behaviour of Ti–50.9 At.% Ni

Stress induced martensitic transformation in NiTi at elevated temperatures: martensite variant microstructures, recoverable strains and plastic strains

Improvement of Tensile Superelasticity by Aging Treatment of NiTi Shape Memory Alloys Fabricated by Electron Beam Wire-Feed Additive Manufacturing