Abstract:The trade-off between the safety and effectiveness of NiTi wire in practical applications has consistently hindered its advancement. This underscores the significance of adjusting its microstructure via appropriate heat-treatment techniques. This study systematically investigates the evolution of the constitution phases of the matrix and the grain size as the aging time increases from three minutes to three hours at 550 °C for Ni50.9Ti49.1 wire, and highlights the significant role of the R phase in static/cyclic tensile failure behavior. When aged for thirty minutes, the matrix consists mainly of the B2 phase, similar to the as-received wire, while it tends to transform into the R phase during loading (intermediate-R phase). In contrast, aging for three hours leads to the formation of the R phase as the matrix phase (matrix-R phase). The two types of R phase are discussed and compared in detail with regard to their contribution to the static/cyclic tensile failure behaviour. The longest fatigue life was obtained in wires with the R phase as the matrix phase, which was due to the combined effect: (i) the rapid attainment of a stable state so as to minimise the extent of phase transformation; (ii) coordination deformation of twin and dislocation to alleviate stress concentration; (iii) and the strong bonding between Ti2Ni and the matrix that reduces the occurrence of the "stretching into the hole-coalescence-microcrack process". The enhanced flexibility observed in the wire with matrix-R phase is due to its reduced elastic modulus and lower transformation plateau. The increase in plasticity is linked to changes in the wire's fracture behavior resulting from grain growth. Such microstructural changes allow the alloy wire to exhibit a more uniform plastic deformation under stress, which in turn postpones the onset of significant fracturing.

Exceptional fatigue resistant NiTi wire mediated by R-phase

Investigation of the Ageing-Induced R-phase and Its Impact on Static/cyclic Tensile Failure in Ni50.9Ti49.1 Wire

R-Phase Transformation Evolution in NiTi SMA Wires Studied via the Internal Friction Technique

Enhanced Tensile Properties And Fracture Reliability Of Cu-Based Amorphous Wires Via Pr-Doping

Step-wise R phase transformation rendering high-stability two-way shape memory effect of a NiTiFe-Nb nanowire composite

Effect of Heat Treatment on Fatigue Behaviour of Biomedical Ni–Ti Alloy Wires under Ultrasonic Conditions

In-situ synchrotron high energy X-ray diffraction study of micro-mechanical behaviour of R phase reorientation in nanocrystalline NiTi alloy

Study on phase transformation, internal stress and texture evolution of cold drawn Nb nanowire-NiTi composite wires upon annealing

Microstructure, Phase Transformation Behavior and Tensile Superelasticity of NiTi Shape Memory Alloys Fabricated by the Wire-Based Vacuum Additive Manufacturing

Mechanical response and actuation fatigue behavior of Nb-nanowire enhanced NiTiHf high temperature shape memory alloy wires

Effect of carbon addition on the microstructure and mechanical behavior of near equiatomic NiTi alloy wire

Remarkable High-Cycle Fatigue Resistance of the TiZrNbHfTa High-Entropy Alloy and Associated Mechanisms

Abnormal superelastic cyclic behavior and stress-induced martensitic transformation mechanism of NiTi alloy with R phase

Bending fatigue life enhancement of NiTi alloy by pre-strain warm surface mechanical attrition treatment

Microstructure of Surface and Subsurface Layers of a Ni-Ti Shape Memory Microwire.

In-situ high energy X-ray diffraction study of deformation behavior in Nb nanoparticle-martensitic NiTi composite wire

Experimental and computational study of the NiTi thin wires mechanical behavior

Twinning and 9R Phase Transition Mediated Extraordinary Cold-drawn Deformability in NiCoCrFeMo High-Entropy Alloy

Study on the Role of Carbon in Modifying Second Phase and Improving Tensile Properties of NiTi Shape Memory Alloys Fabricated by Electron Beam Directed Energy Deposition

Ultrahigh cycle fatigue of nanocrystalline NiTi tubes for elastocaloric cooling

In-situ high energy X-ray diffraction study of microscopic deformation behavior of martensite variant reorientation in NiTi wire